Programing CD tracks (continued)

Other Operations

To

Do this

Cancel Program

Press PLAY MODE repeatedly

play

until “ PGM” disappears.

 

 

Check the

Press . or >repeatedly

program

during Program Play.

Clear a track or

Press CLEAR in stop mode.

disc from the

 

end

 

 

 

Clear the entire

Press and hold CLEAR in stop

program

mode.

 

 

Add tracks or

Perform step 6.

discs to the end

 

of program in

 

stop mode

 

Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD, then press N (or n N on the remote) in Program Play mode.

•“––.––”appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.

•The programed disc and track numbers remain until you erase them, so that the system plays only the existing disc and track numbers if you replace discs. However, the disc and track numbers that are not found in the system or on the disc are deleted from the program, and the rest of the program is played in the programed order.

Labeling a CD

—Disc Memo

You can label up to 60 CDs with titles of up to 20 characters. Whenever you load a labeled CD, the title appears in the display.

Notes

•You cannot label a CD-TEXT disc.

•To ensure that Disc Memos are not erased from memory, have the system connected to a wall outlet at least once a day.

•You can label a CD only during Normal Play (when “ 1 DISC” or “ ALL DISCS” is displayed) in stop mode.

1 Press CD to switch the function to CD.

If “ SHUF” or “ PGM” appears, press PLAY MODE repeatedly until both disappear.

2 Turn DISC SELECT (or press DISC –or DISC + on the remote) until the disc number you want to label appears.

3 Press MENU.
4 Press . or > repeatedly until “ NAME IN” appears.

5 Press ENTER.

The cursor appears.

6 Turn DISC SELECT until the character you want appears.
You can input the following characters:

•Upper cases (A –Z)

•Numbers (0 –9)

•Symbols (‘ –⁄ , + < > _ = `)

12US