Specifications
Amplifier sectionU.S.A. model:AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohms loads both channels driven, from 120
Continuous RMS power output
50 + 50 watts
(6 ohms at 1 kHz, 10% THD)
Total harmonic distortion less than 0.09% (6 ohms at 1 kHz, 30 watts)
Inputs
VIDEO (MD) (phono jacks):
voltage 250 mV/450 mV, impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of 8 ohms or more
SPEAKER:accepts impedance of 6 to 16 ohms
CD player sectionSystem | Compact disc and digital |
| audio system |
Laser | Semiconductor laser |
| (λ = 780 nm) |
| Emission duration: |
| continuous |
Frequency response | 2 Hz |
Wavelength | 780 |
More than 90 dB | |
Dynamic range | More than 90 dB |
| Tape player section | |
Recording system | |
Frequency response | 40 |
| using Sony TYPE I |
| cassette |
Wow and flutter | ±0.15% W.Peak (IEC) |
| 0.1% W.RMS (NAB) |
| ±0.2% W.Peak (DIN) |
FM stereo, FM/AM superheterodyne tuner
| FM tuner section |
|
Tuning range | 87.5 |
Antenna | FM lead antenna |
Antenna terminals | 75 ohms unbalanced |
Intermediate frequency | 10.7 MHz |
| AM tuner section |
|
Tuning range | 530 |
| (with the interval set at |
| 10 kHz) |
| 531 |
| (with the interval set at |
| 9 kHz) |
Antenna | AM loop antenna |
Antenna terminals | External antenna terminal |
Intermediate frequency | 450 kHz |
| Speaker |
|
Speaker system | |
Speaker units |
|
Woofer: | 13 cm, cone type |
Tweeter: | 5 cm, cone type |
Super Tweeter: | 2 cm, dome type |
Nominal impedance | 6 ohms |
Dimensions (w/h/d) | Approx. 210 ⋅ 325 ⋅ |
| 241 mm |
Mass | Approx. 2.8 kg net per |
| speaker |
| General |
|
Power requirements: | 120 V AC, 60 Hz |
Power consumption: | 100 watts |
Dimensions (w/h/d) incl. projecting parts and controls:
| Approx. 280 ⋅ 325 ⋅ |
| 465 mm |
Mass : | Approx. 8.8 kg |
Supplied accessories: | Remote commander (1) |
| Batteries (2) |
| AM loop antenna (1) |
| FM lead antenna (1) |
Design and specifications are subject to change without notice.