Sony MG110, MG310, MHC-MG510, MHC-MG110, MHC-MG310AV Setting up your speakers for Dolby Pro Logic

10

Setting the center speaker

Attach the supplied speaker pads to the bottom

of the center surround speaker to stabilize the

speaker and prevent it from slipping.

Place the center surround speaker at about the

same height as the front speakers. Align the

center surround speaker with the front speakers

or place it slightly back from the position of the

front speakers.

Setting the rear speakers

Place the rear surround speakers facing each

other at about 60 to 90 cm above your listening

position.

60 to 90 cm

Rear surround

speaker

Setting up your speakersfor Dolby Pro Logic

(MHC-MG510AV/MG310AV only)

Positioning the speakers

*MHC-MG510AV only

Each speaker should face the listening position.

Better surround effect will result if all speakers

are set at the same distance from the listening

position.

Place the front speakers 5 to 10 cm or more

away from the left and right of the television.

For MHC-MG510AV, place the sub woofer on

either side of the television.

Place the center speaker on the top-center of

the TV set.

The placement of rear speakers greatly depends

on the configuration of the room. The rear

speakers may be placed on both sides of the

listening position A or behind the listening

position B.

Tip

For MHC-MG310AV customers, you can connect an

optional sub woofer speaker (see page 30).

Front (L)

Center

Sub woofer*

Front (R)

Rear (R)

Rear (L)

Contents

Main Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. Table of Contents Parts Identification Getting Started CD Tape Main unit Remote Control Page Getting Started Hooking up the system Hooking up the system (continued) Getting Started 5Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. To connect optional components Inserting two size AA (R6) batteries into the remote 6Connect the power cord to a wall outlet. Note on placement Setting the center speaker Setting the rear speakers Setting up your speakers for Dolby Pro Logic Positioning the speakers Setting the time CD Saving the power in standby mode Loading a CD 1 2 Getting Started/CD 3 right. 5 right edge of the cover until it clicks. The rotary table turns and the disc slot at the loading position is set to the playing position. Playing a CD Normal Play/Shuffle Play/Repeat Play 4 You can play up to 60 CDs continuously. This system lets you play the CD in different play modes. 2 Programing CD tracks Program Play 7 You can make a program of up to 25 tracks from all the CDs in the order you want to play them. 2 Labeling a CD Disc Memo 2 3 5 6 Using the CD display Presetting radio stations 1 2 3 5 Listening to the radio Preset Tuning 5 1 2 Playing a tape 1 2 3 Loading a tape 1 Recording to a tape CD Synchro Recording/Recording Manually/Program Edit Deck B stands by for recording. Press x. You can record from a CD, tape or radio. The recording level is adjusted automatically. Page Timer-recording radio programs 1 2 3 4 Selecting the sound effect Selecting the effect from the music menu Adjusting the sound Reinforcing the bass sound DBFB Selecting the surround effect 1 2 Enjoying Dolby Pro Logic Surround sound Selecting the sound formation Waking up to music Daily Timer 1 2 3 5 Setting the keyboard Labeling titles through the keyboard 1 2 3 Operating the system through the keyboard You can operate the system without using the buttons and controls on the unit or on the remote. Hooking up the optional A/V components You can connect a digital or an analog component to this system. Labeling titles through the keyboard (continued) Connecting a video game machine Connecting a sub woofer speaker Connecting a DVD player Optional Components/Additional Information Notes on CDs Note on CD-R/CD-RW playback Precautions On operating voltage On safety On placement On heat buildup Troubleshooting Precautions (continued) General Before placing a cassette in the tape deck When using a tape longer than 90 minutes Speakers CD Player Troubleshooting (continued) Tape Deck If other troubles not described above occur, reset the system as follows: Messages One of the following messages may appear or flash in the display during operation. Specifications Amplifier section MHC-MG510AV/MG310AV/MG110 U.S.A. models: AUDIO POWER SPECIFICATIONS MHC-MG510AV MHC-MG310AV MHC-MG110 Specifications (continued) CD player section Tape player section Tuner section Speaker General