Getting Started
11
Adjusting the speaker volume
of each speaker
— Test tone
1Press PRO LOGIC.
“DOLBY PL ON” appears.
2Press TEST TONE on the remote.
The test tone is heard from the speakers in
the following order.
Front (left) t Center t Front (right) t
Rear t Front (left) t …
3From your listening position, press
CENTER (+/–) and REAR (+/–) on the
remote to adjust the volume until the
each volume level becomes the same.
4Press TEST TONE when you finish
adjusting.
The test tone turns off.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Setting the time1 Turn on the system.
2Press TIMER SET.
When you set the clock for the first time, go
to step 5.
3Press – . or > + repeatedly to
select “CLOCK SET”.
4Press ENTER.
5Press – . or > + repeatedly to set
the hour.
6Press ENTER.
7Press – . or > + repeatedly to set
the minute.
8Press ENTER.
Tip
If you made a mistake or want to change the time,
start over from step 1.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.