Sony MG110, MG310, MHC-MG510, MHC-MG110, MHC-MG310AV Labeling a CD

16

7Press M.

The character you selected in step 6 stops

flashing and the cursor shifts to the right.

8Repeat steps 6 and 7 to complete the

entire title.

If you made a mistake

Press m or M until the character you

want to change flashes, then repeat steps 6

and 7.

To erase a character

Press CLEAR while the character is

flashing. You cannot insert characters.

9Press ENTER to complete the labeling

procedure.

Repeat steps 2 to 9 to label additional discs.

To cancel labeling

Press MENU.

Tip

When you replace a disc with a CD-TEXT disc, the

Disc Memo of the CD-TEXT disc is automatically

restored. The Disc Memo of the CD-TEXT disc is no

longer stored (disappears) when the disc is removed.

Note that you cannot change the Disc Memo of a

CD-TEXT disc.

Note

The Disc Memo stores the number of the slot in

which the CD was loaded. Re-enter the Disc Memo

when loading a new CD into that slot.

Labeling a CD

— Disc Memo

You can label up to 60 CDs with titles of up to

20 characters. Whenever you load a labeled

CD, the title appears in the display.

You can also label CDs using an optional

keyboard (see “Labeling titles through the

keyboard” on page 27).

Notes

• You cannot label a CD for which “TEXT” appears

in the display.

• You can label a CD only during Normal Play (when

“1 DISC” or “ALL DISCS” is displayed).

1Press CD to switch the function to CD.

2Turn DISC ACCESS until the disc

number you want to label appears.

3Press MENU.

4Press – . or > + (or . or >

on the remote) repeatedly until “NAME

IN” appears.

5Press ENTER.

6Turn DISC ACCESS until the character

you want appears.

The cursor disappears and the first space for

the disc title flashes.

You can input the following characters:

• Upper cases (A – Z)

• Numbers (0 – 9)

• Symbols (‘ – ⁄ , + < > _ = `)

Contents

Main Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. Table of Contents Parts Identification Getting Started CD Tape Main unit Remote Control Page Getting Started Hooking up the system Hooking up the system (continued) Getting Started 5Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. To connect optional components Inserting two size AA (R6) batteries into the remote 6Connect the power cord to a wall outlet. Note on placement Setting the center speaker Setting the rear speakers Setting up your speakers for Dolby Pro Logic Positioning the speakers Setting the time CD Saving the power in standby mode Loading a CD 1 2 Getting Started/CD 3 right. 5 right edge of the cover until it clicks. The rotary table turns and the disc slot at the loading position is set to the playing position. Playing a CD Normal Play/Shuffle Play/Repeat Play 4 You can play up to 60 CDs continuously. This system lets you play the CD in different play modes. 2 Programing CD tracks Program Play 7 You can make a program of up to 25 tracks from all the CDs in the order you want to play them. 2 Labeling a CD Disc Memo 2 3 5 6 Using the CD display Presetting radio stations 1 2 3 5 Listening to the radio Preset Tuning 5 1 2 Playing a tape 1 2 3 Loading a tape 1 Recording to a tape CD Synchro Recording/Recording Manually/Program Edit Deck B stands by for recording. Press x. You can record from a CD, tape or radio. The recording level is adjusted automatically. Page Timer-recording radio programs 1 2 3 4 Selecting the sound effect Selecting the effect from the music menu Adjusting the sound Reinforcing the bass sound DBFB Selecting the surround effect 1 2 Enjoying Dolby Pro Logic Surround sound Selecting the sound formation Waking up to music Daily Timer 1 2 3 5 Setting the keyboard Labeling titles through the keyboard 1 2 3 Operating the system through the keyboard You can operate the system without using the buttons and controls on the unit or on the remote. Hooking up the optional A/V components You can connect a digital or an analog component to this system. Labeling titles through the keyboard (continued) Connecting a video game machine Connecting a sub woofer speaker Connecting a DVD player Optional Components/Additional Information Notes on CDs Note on CD-R/CD-RW playback Precautions On operating voltage On safety On placement On heat buildup Troubleshooting Precautions (continued) General Before placing a cassette in the tape deck When using a tape longer than 90 minutes Speakers CD Player Troubleshooting (continued) Tape Deck If other troubles not described above occur, reset the system as follows: Messages One of the following messages may appear or flash in the display during operation. Specifications Amplifier section MHC-MG510AV/MG310AV/MG110 U.S.A. models: AUDIO POWER SPECIFICATIONS MHC-MG510AV MHC-MG310AV MHC-MG110 Specifications (continued) CD player section Tape player section Tuner section Speaker General