To change the AM tuning interval (except for European, Russian and Saudi Arabian models)
The AM tuning interval is
9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding TUNING MODE on the unit, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.
Note
You cannot change the AM tuning interval in Power Saving Mode (page 24).
Tips
•The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs.
•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
To improve tuner reception
When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on.
Use buttons on the unit for the operation.
1Press CD to switch the function to CD.
2Press ?/1 to turn off the system.
3After “STANDBY” stops flashing, press ?/1 while holding x.
“CD POWER OFF” appears.
To set CD power on
Repeat the procedure above and “CD POWER ON” appears.
Notes
•When “CD POWER OFF” is selected, disc access time is increased.
•You cannot change the setting in Power Saving Mode (page 24).
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 14).
1
2
3 Press TUNING MODE repeatedly until “PRESET” appears in the display.
4 Press + or – (or turn – TUNING + on the unit) repeatedly to select the desired preset station.
Preset number |
| Frequency | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
continued 