Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. A North American model is used for illustration purpose.
Optional analog component
From the audio output jack of an optional analog component
Use audio cord (not supplied) to connect an optional analog component (Portable Audio Player, etc.) to this jack. You can then record or listen to the sound from the component through this system.
Note
Before connecting or disconnecting the audio cord (not supplied), press VOLUME – repeatedly (or turn the VOLUME control on the unit couterclockwise) to turn down the volume.
Listening to audio from a connected component1Connect the audio cord (not supplied). See “Hooking up optional components”.
2Press FUNCTION repeatedly (or AUDIO IN on the unit) until “AUDIO IN” appears.
3Start playing the connected component.
1Connect the audio cord (not supplied).
2Start recording manually. See “Recording on a tape manually” on page 18.
Notes
•If the connected component has the AVLS (Automatic Volume Limiter System) function, be sure to turn off the function when using the AUDIO IN. Otherwise, you will have to turn up the volume of the speaker, and that may cause distortion.
•If the connected component has the BASS BOOST or MEGA BASS function, be sure to turn off the function when using the AUDIO IN. Otherwise, the sound from the speaker may be distorted.