Programming the CD
tracks
— Program Play
You can make a program of up to 25 tracks from all the CDs in the order you want them to be played.
1
2 Press PLAY MODE repeatedly when the playback is stopped until “PROGRAM” appears in the display.
3 Press one of the DISC 1–3 buttons to select a CD.
To program all the tracks on a CD at once, proceed to step 5 while “AL” appears in the display.
4 Press . or > (CD) repeatedly until the track you want appears in the display.
Disc tray | Track | Total playing time | |
number | number | (including selected track) | |
|
|
|
|
|
|
|
|
5 Press ENTER (A/V amplifier or remote).
The track(s) is (are) programmed. The program step number appears, followed by the total playing time.
6 To program additional tracks, repeat steps 3 to 5.
Skip step 3 to select tracks from the same disc.
7 Press N (CD) (or CD H on the remote).
ToPress
Cancel Program Play PLAY MODE repeatedly when the playback is stopped until “1 DISC” or “ALL DISCS” appears in the display.
Check the program | CHECK on the remote |
| repeatedly. After the last track, |
| “CHECK END” appears in the |
| display. |
|
|
Clear a track | CLEAR on the remote when |
| the playback is stopped. Each |
| time you press the button, a |
| track is cleared from the end of |
| the program. |
Clear a specific track CHECK on the remote repeatedly until the track number you want to clear appears, then press CLEAR on the remote.
Add a track to the | 1 | Press one of the DISC |
program when |
| buttons to select a CD. |
playback is stopped | 2 | Press . or > (CD) |
| ||
|
| repeatedly to select the |
|
| track. |
| 3 | Press ENTER (A/V |
|
| amplifier or remote). |
|
|
|
Tips
•The program you made remains in the system’s memory even after it has been played back. Press N (CD) to play the same program again.
•If
–you have programmed a track number which exceeds 20.
–the total playing time has exceeded 100 minutes.
12