Sony MHC-S3 Inserting two size AA (R6), batteries into the remote, Setting the time, Started Getting, 1 Turn on the system, Notice for carrying this system

Tip

You can place the components as described below. In this case, place the components first, then connect the components.

Tuner CD player

A/V amplifier Cassette deck

Note

Keep the speaker cords away from the antennas to prevent noise.

Inserting two size AA (R6)

batteries into the remote

	]
}	}
	]

Tip

When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

Notice for carrying this system

Do the following to protect the CD mechanism.

1Turn on the system, then turn FUNCTION to select “CD”.

Make sure that all discs are removed from the unit.

2While holding down EQ ON/OFF, press

?/1 until “LOCK” appears.

3Release ?/1 first, then release EQ ON/ OFF.

4Unplug the AC power cord.

Setting the time

1 Turn on the system.2 Press CLOCK/TIMER (or CLOCK/TIMER SET on the remote).

When you set the time for the first time, proceed to step 5.

3 Press O or o repeatedly to select “CLOCK SET”.

4 Press ENTER (A/V amplifier or remote). 5 Press O or o repeatedly to set the hour. 6 Press ENTER (A/V amplifier or remote).

7 Press O or o repeatedly to set the minutes.8 Press ENTER (A/V amplifier or remote).

Tip

If you have made a mistake or want to change the time, start over from step 2.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

Started Getting

9