Tuner
Presetting radio stations
You can preset 20 stations for FM and 10 stations for AM.
1
2 Press and hold TUNING + or – until “AUTO” appears in the display.
Scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear.
MHz
3 Press TUNER MEMORY.
A preset number appears in the display. The stations are stored from preset number 1.
Preset number
MHz
4 Press ENTER (Tuner or remote). The station is stored.
5 Repeat steps 1 to 4 to store other stations.
To tune in a station with a weak signal
Press TUNING + or – repeatedly to tune in the station manually.
To set another station to an existing preset number
Start over from step 1. After step 3, press PRESET + or – repeatedly to select the preset number where you want to store a new station, then proceed to step 4.
Tip
The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations”).
1 Press TUNER/BAND repeatedly to select the band you want.
2 Press PRESET + or – repeatedly to tune in the preset station you want.
Preset number | Frequency |
MHz
To | Do this |
Turn off the radio | Press ?/1. |
|
|
To listen to non-preset radio stations
In step 2, press TUNING + or – repeatedly (Manual Tuning) or press and hold TUNING + or – (Automatic Tuning).
Tips
•When an FM program is noisy, press STEREO/ MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve.
•To improve broadcast reception, reorient the antennas.
14