Memorising only the desired stations
You can store up to 6 stations on each band (a total of 18 for FM I, FM II, and FM III, and 6 for AM) in the order of your choice.
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press and hold either side of (SEEK/AMS) to tune in the station that you want to store on the number button.
4 Press and hold the desired number button ((1) to (6)) until “MEM” appears. The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be erased.
If you cannot tune in a preset station
Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.
Note
If the automatic tuning stops too frequently, press (SENS/BTM) repeatedly until “LOCAL” (local seek mode) is displayed. Only the stations with relatively strong signals will be tuned in.
Tip
If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning).
If FM stereo reception is poor
—Monaural Mode
Press (SENS/BTM) repeatedly until “MONO” appears.
The sound improves, but becomes monaural (“STEREO” disappears).
To return to normal mode, press again until “MONO” disappears.
Receiving the memorised stations
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (6)) on which the desired station is stored.
Changing the display item
Each time you press (DSPL), the item changes as follows:
Frequency ÷Clock
7