Other Functions
Adjusting the sound characteristics
You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels. Each source can store the bass and treble levels independently.
1 Select the item you want to adjust by pressing (SOUND) repeatedly.
BAS (bass) nTRE (treble) n
BALANCE
FADER
2 Adjust the selected item by pressing (+) or (Ð).
Adjust within three seconds after selecting the item. (After three seconds, the buttons function reverts to volume control.)
Enjoy bass and treble even at low volume
— Loudness Function
Press (LOUD) until “LOUD” appears. Bass and treble will be reinforced.
To return to normal mode, press again until “LOUD” disappears.
Cancel the beep sound
Press (6) while pressing (SOUND).
To obtain the beep sound again, press these buttons again.
Note
If you connect an optional power amplifier and do not use the
Attenuating the sound
Press (ATT).
“ATT on” lights up.
To restore the previous volume level, press (ATT) again.
Turning on the clock
display — Power Select Function
Only for cars with an accessory position on the ignition key switch
To turn the Power Select Function ON
Press (3) while pressing (SOUND). The Power Select Function ties the clock display power to the accessory position on the ignition key switch.
To avoid battery wear, the clock is not displayed while the unit is initializing.
8