Specifying the speaker parameters on the subwoofer
MENU/ VOL/
?/1(POWER) ENTER SELECT
1 Press ?/1(POWER) to turn on the subwoofer.
2 Press MENU/ENTER.
3 Turn the VOL/SELECT knob (SETUP is displayed) , and then press MENU/ENTER.
4 Turn the VOL/SELECT knob to select the speaker of which parameter you want to specify, and then press the MENU/ENTER.
•
•
•
5 Turn the VOL/SELECT knob to set the speaker parameter, and then press MENU/ENTER.
6
zWhen you press MENU/ENTER for more than 2 seconds while setting on the subwoofer, the display will be returned to the previous menu.
Parameters
The following are the parameters.
Set the distance from the front speakers to the listening position.
Front speaker distance can be set in 0.2 meter steps from 0.2 to 5 meters. The default figure is 2.4 meters.
Set the distance from the center speaker to the listening position.
Center speaker distance can be set in 0.2 meter steps from a distance equal to the front speaker distance to a distance 0.6 meters closer to the listening position. The default figure is
2.4 meters.
Set the distance from the rear speakers to the listening position.
Rear speaker distance can be set in 0.2 meter steps from a distance equal to the front speaker distance to a distance 1.6 meters closer to your listening position. The default figure is
2.0 meters.
Note
If the front or rear speakers are not placed an equal distance from your listening position, set the distance of the closer speaker.