Adjusting the speaker balance

individually

You can adjust the speakers individually, except for the front speakers.

The center and rear speakers and subwoofer volume levels are adjusted to the front speaker volume level as the criterion.

The speaker to be adjusted flashes in the display window.

SHIFT

WOOFER

CENTER +/– +/–

REAR

MUTING

+/–

(TEST TONE)

To adjust the center speaker

Press CENTER +/–.

To adjust the rear speakers

Press REAR +/–.

To adjust the subwoofer

Press WOOFER +/–.

Adjusting the speaker balance on the

subwoofer

MENU/ VOL/

ENTER SELECT

1 Press MENU/ENTER.

2 Turn the VOL/SELECT knob (SETUP is displayed) , and then press MENU/

ENTER.

3 Turn the VOL/SELECT knob to select the desired level, and then press MENU/

ENTER.

•C-LEV (CENTER LEVEL)

•R-LEV (REAR LEVEL)

•W-LEV (WOOFER LEVEL)

4 Turn the VOL/SELECT knob to adjust the speaker balance, and then press

MENU/ENTER.

zWhen you press MENU/ENTER for more than 2 seconds while setting on the subwoofer, the display will be returned to the previous menu.

zThe test tone will make it easier to hear the difference in the volume level of each speaker. While pressing SHIFT on the remote, press MUTING (TEST TONE). On the system, press MENU/ENTER and turn the VOL/SELECT knob (T-T (TEST TONE) is displayed), and then press

MENU/ENTER.

You will hear the test tone from each speaker in sequence. Adjust the volume level so that the volume of the test tone from each speaker sounds the same on the remote.

To turn off the test tone, while pressing SHIFT, press MUTING (TEST TONE) again. Or press MENU/ ENTER on the system again.

16GB