Cleaning the Screen
•To clean the screen with a cloth, please use a soft cloth lightly moistened with a mild detergent solution or water. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine, or antistatic spray.
As a safety precaution, unplug the TV before cleaning it.
•Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ball point pen or a screw |
|
driver. Otherwise, this type of contact may result in a |
|
scratched screen. | GB |
Troubleshooting
Here are some simple solutions to some problems which may affect the picture and sound.
Problem | Solution |
No picture (screen is dark), no sound | • Plug the TV in. |
| • Press Uon the TV (if uindicator is on, press ;or a programme number |
| on the Remote Commander). |
| • Check the aerial connection. |
| • Check if the selected video source is on. |
| • Turn the TV off for 3 or 4 seconds then turn it on again using U. |
Poor or no picture (screen is dark), but good sound | • Press to enter the PICTURE CONTROL menu and adjust the |
| brightness, contrast and colour. |
Poor picture quality when watching an RGB video source • Press Érepeatedly to select W.
Good picture but no sound | • Press .+. |
| • Check if “Centre in” is selected on the SOUND CONTROL menu. |
| • If o is displayed on the screen, press o. |
|
|
No colour for colour programmes | • Press to enter the PICTURE CONTROL menu, select Reset, then |
| press the joystick to confirm. |
|
|
Remote Commander does not function | • The batteries are weak. |
|
|
If you continue to have problems, have your TV serviced by qualified personnel. Never open the casing yourself.
25
