Installing the

Windows 98

Device Driver

This section explains how to install the drive device driver on a system running Windows 98.

To install the device driver

1Insert USB Floppy Disk Drive Device Driver CD-ROM into the CD-ROM drive of your computer.

2Connect the USB connector of the drive to the USB port of your computer.

The Add New Hardware wizard starts and the following dialog box appears.

3Click [Next].

The following dialog box appears.

4Select “Search for the best drivers for your device (Recommended)”, and then click [Next].

The following dialog box appears.

Installation

5Select the “Specify a location” check box and type “X:\Win98” (where X is your CD-ROM drive letter) in the box, and then click [Next].

The following dialog box appears.

6Confirm the location of the device driver.

Note

If the location is not “X:\WIN98\SONYUFD1.INF” (where X is your CD-ROM drive letter), click [Back] and return to step 4.

Continued

15 GB