Recording
REC lamp (red) | POWER switch |
AUTO FOCUS
ON/OFF button
ZOOM button
START/STOP button
(1) Set POWER switch to ON.
(2) Press START/STOP to start recording.
REC lamp (red) lights up during recording.
To stop recording
Press START/STOP button.
To zoom
Press ZOOM button.
Press T for telephoto (subject appears closer) and W for
You cannot changing the zooming speed of the camcorder.
N o t e
When you use a
To keep a subject in focus
After you focus on a subject, press AUTO FOCUS ON/OFF button to set the camcorder to manual focus mode.
Even if fish swim between the camcorder and the subject, you can still keep the subject in focus.
Note on before recording
Check that the equipment operates correctly and that there is no water leakage at a depth of about one meter (3 feet) before you dive deeper.
Note on recording
Do not cover the control emitter or detector with you finger because the remote control signal for operations is transmitted from the grip to the marine pack.