English
Before operating the unit, please read this instructions thoroughly, and retain it for future reference.
For the customers in U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
For the customers in Canada
This Class B digital apparatus complies with Canadian
For the customers in Germany Directive:EMC Directive 89/336/EEC.
92/31/EEC
This equipment complies with the EMC regulations when used under the following circumstances:
•Residential area
•Business district
•
(This equipment complies with the EMC standard regulations EN55022 Class B.)
•IBM PC/AT compatible computer or Apple Power Macintosh is required. A 3.5 inch 1.44 MB floppy disk drive must be provided as standard.
•We recommend that you use the optional PC card adaptor for Memory Stick,
•If you use 720KB/1.25MB floppy disks, data on the disks may be corrupted.
• You can use this floppy disk adaptor with Mavicas that have the | mark. |
•You cannot use this floppy disk adaptor when running Mavicap.
•You cannot use this floppy disk adaptor with a floppy disk drive that is connected to your computer using the USB connector.
•Operation on a multiprocessor is not guaranteed.
•