3-865-203-13(2)

Memory Stick/PC Card Kit

MSAKIT-PC4A

Operating instructions
Mode d’emploi
Manual de instrucciones
Bedienungsanleitung
Gebruiksaanwijzing
Istruzioni d’uso
Manual de instruções

N50

Sony Corporation 1998 Printed in Japan

A B E

CD

F

2

1

English

Before operating the unit, please read this instructions thoroughly, and retain it for future reference.

For the customers in U.S.A.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
For the customers in Germany
Directive: EMC Directive 89/336/EEC. 92/31/EEC

This equipment complies with the EMC regulations when used under the following circumstances:

Residential area
Business district
Light-industry district
(This equipment complies with the EMC standard regulations EN55022 Class B.)
Supported OS
Microsoft Windows 95/CE
Mac OS

When using with a Macintosh computer:

The Memory Stick can be used as a DOS formatted disk with J. System 7.5 or later, or when PC Exchange is installed in the control panel.

Do not reformat the Memory Stick to the Macintosh format. By doing so, the Memory Stick cannot be used with Windows or other computers.

Set the write-protect switch to “LOCK”.

Please read also the instructions for the machine to which you are connecting this product.

Memory Stick is the registered trademark of Sony Corporation.

Microsoft and Windows are the registered trademarks of Microsoft Corporation.

Mac OS is the registered trademark of Apple computer, Inc.

Precautions

•Do not touch the terminal of the Memory Stick A by your hand or a metal object.

•Do not attach any other material than the supplied label on the label space C of the Memory Stick.

•Keep dust or extraneous matter out of the connector E or the Memory Stick socket D of the PC card adaptor.

•Do not strike, bend, or drop this unit. •Do not disassemble or convert the unit. •Do not wet this unit.

•Do not use or store this unit in the following areas:
Hot locations such as the inside of a car or the outdoors under hot weather.
Locations exposed to direct sunlight.
Humid or corrosive locations.
•Carry or store this unit in the supplied storage case.
How to Use

1Orient the Memory Stick terminal downwards and insert the Memory Stick straight into the slot of the PC card adaptor.

2Install the PC card adaptor in the personal computer.
To remove the Memory Stick:
Press the eject button F.
Note

Do not press the eject button strongly. Doing so may forcibly expel the Memory Stick.

For Proper Operation

•When using with the Windows 95, if the write-protect switch B is set to “LOCK”, the following may occur. This does not represent an error or malfunction of the Memory Stick.

“Unable to write to disk in drive D*: Data or files may be lost.” appears on the monitor screen of the personal computer.

Icons for data which cannot be written appear

on the monitor screen of the personal computer. (When the Memory Stick is removed, the icons disappear.)

*The drive name “D” may vary according to the personal computer in use.

•We recommend that you make a backup copy of important data.
•Do not remove the Memory Stick while reading or writing data.
•Recorded data may be lost or damaged in the following situations:

When you remove the Memory Stick or PC card adaptor or turn off the connected machine while reading or writing data.

When you use this unit in the locations subject to static electricity or electrical noise.

Specifications
PC card adaptor (MSAC-PC1)

Interface standard

PC Card ATA/True IDE standards Operating voltage

3.3V/5 V

Power consumption

Maximum: Approx. 75 mA (average) Operating environment

0ºC - 60ºC (non-condensing) Dimensions (l x w x t)

Approx. 85.6 x 54.0 x 5.0 mm (3.35 x 2.13 x 0.2 in.)

Weight Approx. 30 g (1.06 oz) PC card type

Conforms to PC card type II

Memory Stick (MSA-4A)

Memory type

Flash memory (4 Mbytes)

Operating voltage

2.7V to 3.6 V

Power consumption

Average: Approx. 45 mA

Standby: Approx. 130 µA

Access speed

Writing: Maximum 1.5 Mbytes/second

Reading: Maximum 2.45 Mbytes/second Operating environment

0ºC - 60ºC (non-condensing) Dimensions (l x w x t)

Approx. 21.5 x 50 x 2.8 mm (0.85 x 1.97 x 0.11 in.)

Mass Approx. 4 g (0.14 oz) Supplied accessories

PC card adaptor storage case (1) Memory Stick storage case (1) Label (1)

Operating instructions (1)

Design and specifications are subject to change without notice.
Français

Avant d’utiliser cet appareil, veuillez lire attentivement ces explications et les conserver pour toute référence ultérieure.

Pour les clients au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Pour les clients en Allemagne
Directive: Directive EMC 89/336/CCE et 92/31/CEE

Cet appareil est conforme aux règlements EMC quand il est utilisé dans les circonstances suivantes:

En région résidentielle
Dans un quartier d’affaires
Dans un quartier d’industries légères
(Cet appareil est conforme aux règlements EMC arandards EN55022 de Classe B.)
Système d’exploitation (OS) supporté
Windows 95/CE de Microsoft

Mac OS

A l’emploi d’un ordinateur Macintosh:

Le Memory Stick peut être utilisé comme un disque DOS formaté avec le J.System 7.5 ou ultérieur, ou quand PC Exchange est installé dans le panneau de commande.

Ne reformatez pas le Memory Stick au format Macintosh, car le Memory Stick ne pourrait plus être utilisé avec Windows ou sur d’autres ordinateurs.

Réglez l’onglet de protection contre écriture sur “LOCK”.

Veuillez lire également les instructions concernant l’appareil auquel vous raccordez cet article.

Le terme “Memory Stick” est une marque déposée de Sony Corporation.

Microsoft et Windows sont des marques déposées de Microsoft Corporation.

Mac OS est une marque déposée de Apple Computer,Inc.

Précautions

•Ne touchez pas la borne A du Memory Stick avec les doigts ou un objet métallique.

•Ne collez aucun matériau autre que l’étiquette fournie à l’endroit C, prévu sur le Memory Stick.

•Protégez le connecteur E dans la prise D du Memory Stick de l’adaptateur de carte PC contre la poussière et les corps étrangers.

•Ne cognez pas, ne pliez pas et ne laissez pas tomber cet article.
•Ne démontez pas et ne modifiez pas cet article.
•Ne mouillez pas cet article.
•N’utilisez pas et ne rangez pas l’article dans les endroits suivants:

Endroits chauds comme l’intérieur d’une voiture ou à l’extérieur par temps chaud.

Endroits en plein soleil.
Endroits à atmosphère humide ou
corrosive.
•Transportez ou rangez cet article dans l’étui fourni.
Utilisation

1Orientez la borne du Memory Stick vers le bas et insérez celui-ci en ligne droite dans la fente de l’adaptateur de carte PC.

2Installez l’adaptateur de carte PC dans l’ordinateur.
Pour retirer le Memory Stick:
Appuyez sur la touche d’éjection F.
Remarque

N’appuyez pas trop fort sur le bouton d’éjection. Le Memory Stick risque d’être expulsée.

Pour un fonctionnement correct

•A l’emploi avec Windows 95, si le l’interrupteur d’interdiction d’écriture B est réglé sur “LOCK”, les situations suivantes peuvent se présenter. Il ne s’agit pas cependant d’un dysfonctionnement ou d’une erreur du Memory Stick.

“Unable to write to disk in drive D*: Data or files may be lost.” apparaît sur l’écran de l’ordinateur personnel.

Des icônes pour les données qui ne peuvent pas être écrites apparaissent sur l’écran de l’ordinateur personnel. (Quand le Memory

Stick est enlevé, les icônes disparaissent.)

*Le nom de lecteur “D” peut changer selon l’ordinateur utilisé.

•Nous conseillons d’effectuer une copie de secours des données importantes.
•Ne retirez pas le Memory Stick pendant la lecture ou l’écriture de données.

•Une perte ou une destruction des données enregistrées peut se produire dans les cas suivants:

Si vous retirez le Memory Stick ou l’adaptateur de carte PC, ou si vous mettez l’appareil raccordé hors tension pendant la lecture ou l’écriture de données.

Si vous utilisez cet article dans un endroit, subissant de l’électricité statique ou un brouillage électrique.

Fiche technique
Adaptateur de carte PC (MSAC-PC1)

Interface standard

Normes ATA de Carte PC/True IDE Tension de fonctionnement

3,3 V/ 5 V

Consommation

Maximum: Env. 75 mA (moyenne) Milieu de fonctionnement

De 0 à 60°C (sans condensation) Dimensions (l x h x p)

Env. 85,6 x 54,0 x 5,0 mm (3,35 x 2,13 x 0,2 pouces)

Poids Env. 30 g (1,06 once) Type de carte PC

Conforme à Carte PC de type II

Memory Stick (MSA-4A)

Type de mémoire

Mémoire flash (4 M-octets) Tension de fonctionnement

De 2,7 à 3,6 V

Consommation

Moyenne: Env. 45 mA

En attente: Env. 130 µA Vitesse d’accès

Ecriture: Maximum 1,5 Mo/seconde

Lecture: Maximum 2,45 Mo/seconde Milieu de fonctionnement

De 0 à 60°C (sans condensation) Dimensions (l x h x p)

Env. 21,5 x 50 x 2,8 mm

(0,85 x 1,97 x 0,11 pouces) Poids Env. 4 g (0,14 once) Accessoires fournis

Etui de rangement d’adaptateur de carte PC (1)

Etui de rangement de Memory Stick (1) Etiquette (1)

Mode d’emploi (1)

La conception et les spécifications peuvent être changées sans avis préalable.
Español

Antes de utilizar la unidad, lea detenidamente estas instrucciones, y consérvelas para futuras referencias.

Para los clientes en Canadá
Este aparato digital de Clase B cumple con la ICES-003 canadiense.
Para los clientes en Alemania
Directiva: EMC Directiva 89/336/EEC. 92/31/EEC

Este equipo cumple con los reglamentos de la EMC cuando se utiliza en las circunstancias siguientes:

Zona residencial
Distrito financiero
Zona de industria ligera
(Este equipo cumple con los reglamentos estándar de la EMC EN55022, Clase B)
Sistema operativo (OS) soportado

Microsoft Windows 95/CE

Mac OS

Cuando se utilice con un ordenador Macintosh:

La Memory Stick a puede utilizarse como disco de formato DOS con J. System 7.5 o posterior, o cuando PC Exchanger se encuentre instalado en el panel de control.

No vuelva a darle formato a la Memory Stick al formato de Macintosh. Si lo hace, no podrá utilizar la barra de memoria con Windows ni otros ordenadores.

Ponga el interruptor de protección contra escritura en “LOCK”.

Lea también las instrucciones de la máquina a la que vaya a conectar este producto.

Memory Stick es marca registrada de Sony Corporation.

Microsoft y Windows son marca registradas de Microsoft Corporation.

Mac OS es marca registrada de Apple computer, Inc.

Precauciones

•No toque el terminal de la Memory Stick A con las manos ni con un objeto metálico.

•No fije ningún otro material que no sea la etiqueta suministrada en el espacio para la misma C de la Memory Stick.

•Mantenga limpio el conector macho E o el conector hembra D de la Memory Stick del adaptador de la tarjeta para PC.

•No golpee, doble, ni deje caer esta unidad. •No desarme ni convierta la unidad.

•No moje esta unidad.
•No utilice ni guarde esta unidad en los lugares siguientes:

Lugares cálidos tales como en el interior de un automóvil o en exteriores expuestos a climas cálidos.

Lugares expuestos a la luz solar directa.
Lugares corrosivos o húmedos. •Transporte esta unidad en la caja
suministrada.
Forma de utilización

1Oriente el terminal de la Memory Stick hacia abajo e insértela de forma recta en la ranura del adaptador de la tarjeta para PC.

2Instale del adaptador de la tarjeta para PC en su PC.
Para extraer la Memory Stick
Presione el botón de expulsión F.
Nota

No presione con fuerza el botón de expulsión. Si lo hiciese la Memory Stick podría salirse a la fuerza.

Para la operación apropiada

•Cuando utilice Windows 95, si el interruptor de protección contra escritura B está en “LOCK”, puede ocurrir lo siguiente. Esto no representa un error ni un mal funcionamiento de la Memory Stick.

En la pantalla del monitor del PC aparece “Unable to write to disk in drive D*: Data or files may be lost.” (No es posible escribir en la unidad D*. El archivo o los datos pueden borrarse.)

Los iconos para los datos que no puedan escribirse aparecerán el la pantalla del monitor

del PC. (Cuando extraiga la Memory Stick, los iconos desaparecerán.)

*El nombre de la unidad “D” puede variar de acuerdo con el PC que esté utilizando.

•Le recomendamos que realice una copia de protección de datos importantes.
•No extraiga la Memory Stick durante la lectura ni la escritura de datos.
•Los datos grabados pueden dañar se o perderse en las situaciones siguientes:

Cuando extraiga la Memory Stick o el adaptador de la tarjeta para PC, o si desconecta la alimentación de la máquina conectada durante la lectura o la escritura de datos.

Cuando utilice esta unidad en lugares sometidos a electricidad estática o ruido eléctrico.

Especificaciones
Adaptador de tarjeta para PC (MSAC- PC1)

Interfaz estándar

para PC ATA/IDE verdadero Tensión de alimentación

3,3 V/5 V Consumo

Aprox. 75 mA como máximo (medio) Medio ambiente de operación

0 - 60°C (sin condensación de humedad) Dimensiones (an x al x prf)

Aprox. 85,6 x 54,0 x 5,0 mm Peso Aprox. 30 g

Tipo de tarjeta para PC

De acuerdo con las tarjetas para PC tipo II

Memory Stick (MSA-4A)

Tipo de memoria

Memoria flash (4 Megabytes) Tensión de alimentación

2,7 a 3,6 V Consumo

Medio: Aprox. 45 mA

Espera: Aprox. 130 µA Velocidad de acceso

Escritura:

1,5 Megabytes/segundo como máximo Lectura:

2,45 Megabytes/segundo como máximo Medio ambiente de operación

0 - 60°C (sin condensación de humedad) Dimensiones (an x al x prf)

Aprox. 21,5 x 50 x 2,8 mm Masa Aprox. 4 g

Accesorios suministrados

Caja para el adaptador de tarjeta para PC

(1)

Caja para la Memory Stick (1) Etiqueta (1)

Manual de instrucciones (1)

El diseño y las especificaciones están sujetos a cambio sin previo aviso.