1.If you want to print only a portion of your project, create a time selection that includes the section of your project.
2.In the Make Movie Wizard, click the Save it to my camera or portable device button.
3.Select the DV camera radio button, and then click Next. The Device Setup dialog is displayed.
4.Use the Device Setup dialog to configure your camera or deck:
a.From the Device
b.From the Video
Note: You’ll need to choose a rendering template that inserts pulldown fields to create a standard DV file if your project properties are set to 24p or if you selected the Allow pulldown removal when opening 24p DV check box on the General tab of the Preferences dialog. Use the NTSC DV 24p (inserting
If you cleared the Allow pulldown removal when opening 24p DV check box before adding your media and your project properties are not set to 24p, your 24p video is read as 29.97 fps interlaced video (60i), so you can choose whichever NTSC DV or PAL DV template suits your project requirements.
c.From the Audio
d.If necessary, drag the Record engage delay slider to specify the number of frames it takes your camera or deck to switch from Record Pause to Record mode. If you’re missing frames from the beginning of your file after printing to tape, increase the setting. If you see duplicated frames at the beginning of your video, decrease the setting.
e.Click the Next button. The Render Settings dialog is displayed.
5.Use the Render Settings dialog to choose the format you want to use to print your video to tape.
a.Select the Enable multichannel mapping check box if you’re working with multichannel source files and need to specify which channels to use in the stereo file when printing to tape. Click the Channels button to choose which channels you want to render.
Note: Multichannel audio is not supported when printing to a DV device.
b.Select the Render loop region only check box if you want to print only the portion of your project that you selected in step 1.
c.Select the Prerender audio to proxy file check box if you want to prerender the audio portion of your project before printing to tape.
The Prerendered files folder box displays the path to the folder where prerendered files are saved. Video files are saved to this folder so that you don’t need to rerender the project every time you view it.
If you want to change the location of the folder, click the Browse button and choose a new location. Changing the setting here will update the setting on the Folders tab of the Project Properties dialog.
d.Click Next. The Leader and Trailer dialog is displayed.
6.Use the Leader and Trailer dialog to set up the data that will be printed before and after your project:
a.Select the Add test pattern leader check box if you want to print a test pattern before your video.
b.From the Test pattern style
c.Type a value in the Duration box to determine the length of the test pattern.
d.Select the Play 1 kHz tone with test pattern check box to add an audio test tone that will play along with the test pattern.
e.Select the Add black leader check box and type a value in the Duration box if you want to print black frames before your video.
f.Select the Add black trailer check box and type a value in the Duration box if you want to print black frames after your video.
g.Click Next. The Device Control dialog is displayed.
SAVING AND RENDERING PROJECTS 71