QUALITY <STANDARD*/FINE>

•Select STANDARD as a standard image quality. •Select FINE when giving priority to image quality.

FLASH LEVEL < HIGH/ NORMAL*/ LOW>

•Set to make the flash level higher than normal. •Normally select NORMAL.

•Set to make the flash level lower than normal.

FILE NUMBER <NORMAL*/SERIES>

•Select NORMAL to reset the numbering of files each time the floppy disk is changed.

•Select SERIES to put numbers to files in sequence even if the floppy disk is changed.

DEMO MODE <STANDBY/ON* or OFF>

Only when you use the AC power adaptor (not supplied), DEMO MODE appears in the menu.

•Select ON to make the demonstration appear. The demonstration will start about 10 minutes after the power is turned on if the camera has not been operated.

•Select OFF to deactivate the demonstration mode.

Note

To stop the demonstration, turn off the camera.

operations Advanced

25-EN