Sony MXD-D3 Recording on an MD Manually

10 Adjust the recording level, if necessary.

For details, see “Adjusting the Recording Level” on page 20.

11 Press ·or P. Recording starts.

Recording on MDs

To turn on the Smart Space Function and Auto Cut

Press MENU/NO twice to display “Setup Menu.”

Function again

1 Do Steps 1 and 2 in “To turn off the Smart Space

Turn AMS to select “Stereo Rec,” then press AMS.

Function and Auto Cut Function” above.

2 Turn AMS to select “S.Space On,” then press AMS.

Turn AMS to select the recording mode, then

3 Press MENU/NO.

press AMS.

To record in

Select

Notes

Stereo

Stereo Rec

• When you turn off the Smart Space Function, the Auto Cut

Function is also turned off automatically.

Monoaural

Mono Rec*

• The Smart Space Function and Auto Cut Function are

factory set to on.

* In monoaural mode, the recording time is about two

• If you turn off the deck or disconnect the AC power cord,

times longer than in stereo mode.

the deck will recall the last setting (On or Off) of the Smart

Space and Auto Cut Functions the next time you turn on

Press MENU/NO.

the deck.

8 Decide a point on the MD where you want to start

recording.

Recording on an MD Manually

To record on a brand new MD or start recording

You can start recording from the end of the existing

from the end of the existing material

Skip this step.

material or record over the existing tracks just as you

would on an analog cassette tape.

To record from a specific point of a recorded

When using the remote, set SELECT to CD or MD.

track

To perform CD Synchro-Recording, see “Recording a

Press ·to start playback, and press Pat the

CD to an MD” on pages 8 and 9 or “Recording a CD to

point where you want to start recording.

an MD at High Speed” on page 23.

MENU/NO

REC r

To record erasing the previously recorded tracks

Turn AMS (or press =or +repeatedly) until

the number of the track to be recorded over

appears in the display.

? 1/u

0 )

Press REC r.

· P

The deck stands by for recording.

INPUT AMS ·P

1 Turn on the amplifier and set the source selector to the position for the sound source you want to record.

2Insert a recordable MD.

3 Press INPUT repeatedly to select the input			12 Start playing the sound source you want to
3 Press INPUT repeatedly to select the input			record.
	connector.
			(Continued)
	To record through	Select	(Continued)
	To record through	Select

	DIGITAL OPTICAL IN	OPT

	LINE (ANALOG) IN	ANALOG

To record from the CD player section manually

Press INPUT repeatedly to select CD.