Manuals / Brands / Home Audio / CD Player / Sony / Home Audio / CD Player

Sony MXD-D4, MXD-D40 To protect an MD against accidental erasure, Do not disconnect the deck from the power source immediately after recording

1 52

Download 52 pages, 838.7 Kb

Notes

•You cannot record over existing material. The deck automatically starts recording from the end of the existing material.

•Make sure that the remaining recordable time on the MD is longer than the playing time of the CD, especially if you want to record all the tracks on the CD.

•You cannot pause recording.

•If the play mode is set to Repeat Play or Shuffle Play, it automatically switches to normal play at step 5.

•The recording level specified in the Setup Menu (page 23) is not applied. The initial reference level (0.0 dB) is used instead.

When “TOC Writing” flashes in the display

The deck is currently updating the Table Of Contents (TOC). Do not move the deck or pull out the AC power cord. Changes to an MD made through recording are saved only when you update the TOC by ejecting the MD or turning off the deck.

Basic Operations

Do not disconnect the deck from the power source immediately after recording

If you do, recorded material may not be saved to the MD. To save the material, after recording, press §EJECT to take out the MD or turn off the deck. “TOC Writing” will flash at this time.

After “TOC Writing” goes out, you can pull out the AC power cord.

To protect an MD against accidental erasure

To make it impossible to record on an MD, slide the tab in the direction of arrow, opening the slot. To allow recording, close the slot.

Record-protect tab

Rear of the disc Slide the tab in the

direction of arrow

Operations Basic

9

Contents

Page WARNING About This Manual TABLE OF CONTENTS Getting Started Playing a CD Playing an MD Recording a CD to an MD Unpacking Inserting batteries into the remote Hooking Up the System Overview Hookups Connecting the AC power cord Connecting a PC (MXD-D40only) Demonstration mode Playing a CD Playing an MD Recording a CD to an MD Do not disconnect the deck from the power source immediately after recording To protect an MD against accidental erasure Recording a CD to an MD at High Speed If “–Retry–”flashes in the display after you press ·or Pin step When “TOC Writing” flashes in the display Using the Display Changing the display Detailed display for CD player section Detailed display for MD deck section Locating a Specific Track Locating a Particular Point in a Track Repeating the current track only Playing in Random Order (Shuffle Play) Creating Your Own Program (Program Play) Falling Asleep to Music (Sleep Timer) Changing the Pitch of the MD (Pitch Control Function) Setting the pitch automatically in steps (Auto Step Control Function) Finely controlling the pitch (Fine Control Function) Notes on Recording Useful Tips for Recording Checking the remaining recordable time on the MD Monitoring the input signal (Input Monitor) If “Auto Cut” appears in the display (Auto Cut) If “Smart Space” appears in the display (Smart Space) Recording on an MD Manually Recording for Long Times Adjusting the Recording Level Marking Track Numbers While Recording Marking track numbers manually Recording the Current CD Track (REC-ITFunction) To change the trigger level for Track Marking Function Synchro-RecordingWith an External Audio Equipment (Music Synchro-Recording) Z Starting Recording With Prestored Audio Data Fading In and Out (Fader) Z Fade-inrecording Fade-outrecording Notes on Editing Erasing Recordings Erasing a single track (Track Erase Function) Erasing all tracks on an MD (All Erase Function) Erasing a Part of a Track (A-BErase Function) Dividing Recorded Tracks (Divide Function) Dividing a track after selecting the track Dividing a track after selecting the dividing point Combining Recorded Tracks (Combine Function) Moving Recorded Tracks (Move Function) Labeling Recordings (Name Function) If you entered the wrong character To erase a character To enter a space To cancel labeling Copying a track or disc title within an MD (Name Copy Function) Labeling tracks and MDs with the remote Z Changing an existing title Z Erasing a title on a disc (Name Erase Function) Erasing all titles on an MD (Name All Erase Function) Undoing the Last Edit (Undo Function) Changing the Recorded Level After Recording (S.F Edit Function) Changing the overall recording level Fade-inand Fade-outRecording Precautions Display Messages System Limitations Troubleshooting CD player section MD deck section Others After you’ve attempted the prescribed remedies Specifications Guide to the Serial Copy Management System Page Index Names of controls Table of Setup Menus Self-DiagnosisFunction Notes on CDs Note on High-Speed CD-MDSynchro- Recording Handling MDs