Recording on MDs
1While the deck is stopped, press MENU/NO twice to display “Setup Menu.”
2Turn AMS to select “S.Space Off,” then press AMS.
3Turn AMS to select “S.Space On,” then press AMS.
4Press MENU/NO.
Notes
•When you turn off the Smart Space Function, the Auto Cut Function is also turned off automatically.
•The Smart Space Function and Auto Cut Function are factory set to on.
•If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting (On or Off) of the Smart Space and Auto Cut Functions the next time you turn on the deck.
Recording on an MD Manually
You can start recording from the end of the existing material or record over the existing tracks just as you would on an analog cassette tape.
When using the remote, set SELECT to CD or MD. To perform
AMS REC r
INPUT · P
1Turn on the amplifier and set the source selector to the position for the sound source you want to record.
2Insert a recordable MD.
3Press INPUT repeatedly to select the input connector.
To record through | Select |
DIGITAL OPTICAL IN | OPT |
|
|
ANALOG IN | ANALOG |
|
|
Press INPUT repeatedly to select CD.
4Decide a point on the MD where you want to start recording.
To record on a brand new MD or start recording from the end of the existing material
Skip this step.
To record from a specific point of a recorded trackPress ·to start playback, and press Pat the point where you want to start recording.
To record erasing the previously recorded tracksTurn AMS (or press =or +repeatedly) until the number of the track to be recorded over appears in the display.
(Continued)
21