Adjusting the sound quality

You can change the preset sound quality and store the results in “SOUND1” or “SOUND2”.

1 Press SOUND repeatedly to select “SOUND1” or “SOUND2”.

2 During playback, press SOUND for 2 seconds or more.

The player changes to B (bass) setting mode. Pressing jog lever changes the player to T (treble) setting mode.

When you select bass-setting mode, “B” appears. When you select treble setting mode, “T” appears.

3 Slide the jog lever repeatedly to adjust the level.

Example: While adjusting the bass

The cursor moves. (Position: –2)

–4 ±0 +3

The sound can be adjusted in 8 steps (–4, –3, ...±0, ...+2, +3).

To switch “B” (bass) and “T” (treble):

Press the jog lever.

To switch “SOUND1” and “SOUND2”:

Press SOUND.

4 Press the jog lever to enter.

The sound settings are saved and the playback display appears again.

To cancel the setting

Press SOUND repeatedly until nothing appears in the display in step 1.

To cancel the procedure

Press and hold the DISPLAY button or x button for 2 seconds or more.

For the player operation, see page 31.

z

•Settings can also be changed while playback is momentarily paused (X).

•If the player is not operated approximately for 3 minutes, the current setting is stored and the display automatically switches to normal playback.

Note

When you use the Digital Sound Preset, the sound may break or become distorted depending on the settings or the track. In this case, change the settings of the sound quality.

24