Connecting the MD Walkman to your computer
After the software installation is completed, connect the MD Walkman to your computer.
1 Insert a recordable disc into the MD Walkman.
2 Insert the new dry battery into the MD Walkman, and connect the MD Walkman to the computer using the supplied dedicated USB cable.
To the USB connecting terminal
MD Walkman
Insert the new
dry battery Dedicated USB cable
To the USB jack/ dedicated jack
Computer
3 Check the connections.
When the connections have been properly made, “PCppMD”* appears in the display of the MD Walkman.
∗Depending on the MD Walkman, “Net MD” may be displayed.
Note
When using the MD Walkman connected to your computer, it is recommended that you use a new dry cell battery. We do not assure the results should there be a
48