Sony MZ-NH700 “: Set”, 1 Enter the menu and select “Edit”, 4 Label a group (see “Adding titles (Title)” (page 44))

Notes

•When the total number of characters in the titles on a disc exceed the maximum that can be input:

—If the disc is being used in Hi-MD mode, you can make a group setting, but cannot add a group name in step 4.

—If the disc is being used in MD mode, you cannot make a group setting.

•The tracks or groups must be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can assign them (“Moving recorded tracks or groups (Move)”, page 49).

Jog dial

NAVI/

MENU

5-way control

key (NENT)x

1 Enter the menu and select “Edit” -“ : Set”.

2 Turn the jog dial until the number of the desired first track appears in the display, and then press NENT to enter.

This selects the first track of a new group. If the disc contains groups, only the first track number of each group is displayed.

3 Turn the jog dial until the number of the desired last track appears in the display, and then press NENT to enter.

This selects the last track of the new group and the group can be labeled. If the disc contains groups, only the last track number of each group is displayed.

4 Label a group (see “Adding titles (Title)” (page 44)).

Notes

•In step 2, the first track must be either the first track of an existing group or a track that does not belong to a group.

•When selecting the last track in step 3, make sure the track comes after the one selected in step 2. The last track must be either the last track of an existing group or a track that does not belong to a group.

48