Sony MZ-NH700 Combining tracks (Combine), 3 Press T MARK to erase the mark, The track numbers will change as follows

Combining tracks (Combine)

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark.

The track numbers will change as follows.

Notes

•You cannot erase a track mark on a track that has been transferred from your computer.

•You cannot erase a track mark on a track that has been recorded in Hi-MD mode using the MD Simple Burner software.

•You cannot combine tracks recorded in different recording mode.

1 2 3 4

Erase a track mark

123

Track numbers decrease

T MARK

2 Find the track mark by pressing the 5- way control key towards . slightly.

For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for a few seconds.

3 Press T MARK to erase the mark.

“MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.

z

When a track mark is erased when you combine two tracks, the recording date and title of the second track changes to those of the first track.

Note

When you erase a track mark between the two consecutive tracks that are assigned into different groups, the second track is re-assigned into the group containing the first track. In addition, if you combine a track that is assigned to a group with a track that is not assigned to a group (two consecutive tracks), the second track takes the same registration setting as the first track.

X5-way control key (.)

1While playing the track with the track mark you want to erase, press X to pause.

54