Sony MZ-NHF800 End, LOW, HIGH, cord, HOLD, OVER, NAVI, ERROR, ERROR, TRACK, FORMAT, MEMORY, IN MENU, control, BATTERY, D-LREADY, recorder, BOOKMARK, DC IN TOO, DISC FULL

Message	Meaning/Remedy
DC IN TOO	• Voltage of the power supply is too high (The supplied AC power adaptor or
HIGH	the recommended car battery cord is not used).
	, Use the supplied AC power adaptor or the recommended car battery
	cord.
DISC FULL	• Recording may not be done if the remaining recordable time on the disc is
	48 seconds or less.
	, Replace the disc.
D-L READY	• MD Simple Burner is now ready to record an audio CD to the disc in the
	recorder using Simple mode. (Refer to “Software Operation” section.)
EJECT DISC	• The recorder has finished communicating with the computer and it is safe to
OK	eject the disc from the recorder or disconnect the dedicated USB cable.
End	• The recorder reached to the end of the disc while playing or pressing >.
ERROR	• There is an internal malfunction in the system.
	, Restart the operation by doing steps 1 to 3 on page 91.
ERROR XX	• There is an internal malfunction in the system.
	, Restart the operation by doing steps 1 to 3 on page 91. If the message
	appears again, please consult your nearest Sony dealer.
FORMAT	• A disc with a format that the recorder does not support was inserted.
ERROR DISC	• A disc formatted on the computer was inserted.
	, Insert a standard MD or a disc used in Hi-MD mode.
	, When formatting a disc on the computer, make sure to use the
	SonicStage software.
GROUP FULL	• You tried to create a 256th group on a disc used in Hi-MD mode or 100th
	group on a standard disc.
	, You can create only up to 255 groups (on a disc used in Hi-MD mode)
	or 99 groups (on a standard disc) on a disc. Keep the group number
	within 255 or 99.
HOLD	• The recorder is locked.
	, Slide HOLD against the arrow to unlock the recorder (page 16).
IN MENU	• You pressed a key on the remote control while selecting a menu on the
	recorder.
	• You pressed a key on the recorder while selecting a menu on the remote
	control.
LOW	• A battery is weak.
BATTERY	, Charge the rechargeable battery or replace the dry battery (page 15).
MEMORY	• You tried to record with the recorder placed where it receives continuous
OVER	vibration.
	, Put the recorder on a stable place, and start recording again.
NAVI	• You pressed a key on the remote control while selecting the Main play
	mode on the recorder.
NO BATTERY	• Recharging was attempted with a non-rechargeable battery inserted.
	, Insert a rechargeable battery and start the charging process again.
NO	• You selected bookmark play without setting bookmarks.
BOOKMARK	, Set bookmarks (page 46).
TRACK

94