Recording without overwriting existing material

If you wish to avoid overwriting the current contents of an MD, do the following procedure. All new material will then be recorded from the end of the current contents.

SELECT >/.

MENU/ENTER

1 While the recorder is stopped, press

MENU/ENTER.

2 Press SELECT >/.repeatedly until “R-Posi” flashes in the display, and then press MENU/ENTER.

3 Press SELECT >/.repeatedly until “Fr End” flashes in the display, and then press MENU/ENTER.

To start recording over the current contents

Select “FrHere” in step 3.

Notes

•If you start recording while the recorder is in play-pause mode, the recording will begin from the point at which is paused.

•The setting will remain even after the power is turned off.

Adding track marks automatically at specified intervals (Auto Time Stamp)

Use this feature to add track marks automatically at specified intervals when recording through the analog input connector.

SELECT >/.

MENU/ENTER

1 While the recorder is recording or in recording pause, press MENU/

ENTER.

2 Press SELECT >/.repeatedly until “TimeMK” flashes in the display, and then press MENU/

ENTER.

3 Press SELECT >/.repeatedly until the desired time interval flashes in the display.

Select one of the following intervals.

Display

Time

 

 

OFF

—

 

 

5 min

Approx. 5 min.

 

 

10 min

Approx. 10 min.

 

 

15 min

Approx. 15 min.

 

 

4 Press MENU/ENTER.

To cancel Auto Time Stamp

Select “OFF” in step 3, and then press MENU/ENTER, or stop recording.

19