Moving recorded tracks
You can change the order of the recorded tracks.
Example
Move track C from the third to the second track
Before moving
A B C D
A C B D
After moving
xSELECT >/.
MENU/ENTER
1 While playing the track you want to move, press MENU/ENTER, press SELECT >/.repeatedly until “EDIT” flashes in the display, and then press MENU/ENTER again.
“
” and “Name” flash in the display and the recorder plays the selected track repeatedly.
2 Press SELECT >/.repeatedly until “ 
” and “Move” flash in the display, and then press MENU/
ENTER.
For the example above, “003 t” and “t 003” appear alternately in the display.
3 Press SELECT >/. to select the destination track number.
For the example above, “003 t” and “t 002” appears in the display.
4 Press MENU/ENTER again.
The track moves to the selected destination track.
To cancel moving
Press x.
Adding a track mark
You can add track marks so that the part after the new track mark is counted as a new track.
The track numbers will increase as follows.
Add a track mark
1 2 3 4
1 | 2 | 3 | 4 | 5 |
|
Track numbers increase
T MARK
1 While playing or pausing an MD, press T MARK at the point you want to mark.
“MK ON” appears in the display, and a track mark is added. The track number will increase by one.
To add track marks while recording
Press T MARK at the point you want to add a track mark.
You can use Auto Time Stamp to add track marks automatically at specified intervals (except while digital recording) (page 19).
28