161GB
Table of
contents Sample photo Menu Index
Upload Settings
Sets whether or not you use the upload function when using an Eye-Fi card
(commercially available). This item appears when an Eye-Fi card is inserted in the
camera.

1MENU t [Setup] t [Upload Settings] t desired setting.

• Eye-Fi cards are sold in the U.S.A., Canada, Japan, and some countries in the EU (as of March in 2011).
• For more information, please contact the manufacture r or vendor directly.
• Eye -Fi cards can be used only in the countries/regions whe re they were purchased. Use Eye-Fi cards in
accordance with the law of the countries/regions where you purchased the card .
• Do not u se an Eye-Fi card inserted in the camera on an airplane. If there is an Eye-Fi card inserted in the
camera, set [Upload Settings] to [Off]. is displayed on the screen when [Upload Settings] is set to
[Off].

1Set your Wi-Fi network or destination on the Eye-Fi card.

For details, refer to the manual supplied with the Eye-Fi card.

2Insert the Eye-Fi card you have set up into the camera, and shoot still

images.

Images are transferred to your computer, etc., automatically via the Wi-Fi network.
• When you use a brand-new Eye-Fi card for the first time, copy the install file of Eye-Fi manager recorded
on the card to your computer before formatting the card.
• Use an E ye-Fi card after updating the firmware to the latest version . For details, refer to the manual that
comes with the Eye-Fi card.
• The po wer save function of the camera does not work while it is tra nsferring images.
• If (error) is displayed, remove the memory card an d reinsert it, or turn off then turn on the power
again. If appears again, the Eye-Fi card may be damaged.
• Wi -Fi network communication may be influenc ed by other communication devices. If the
communication status is poor, move closer to the access point of the Wi-Fi network.
• For details on the file types that can be uploaded, refe r to the operating instructions supplied with th e
Eye-Fi card.
• T his product does not support the Eye-Fi “Endless Me mory Mode.” Make sure that Eye-Fi cards that you
insert into this product have “Endless Memory Mode” turned off.
On Enables the upload function. The icon on the screen changes
according to the communication status of the camera.
Standby. No images are to be sent.
Connecting.
Upload standby.
Uploading.
Error
Off Disables the upload function.
Notes

Transferring images using an Eye-Fi card

Notes