How to Troubleshoot the PowerHub | Xantrex Technology PH1800

Troubleshooting

How to Troubleshoot the PowerHub 1800

	Important: If the unit is not performing as expected, BEFORE returning the
	unit to the retailer, please review this information carefully.
	The following information is provided to assist in the troubleshooting of
	the PowerHub 1800. Please review this information carefully.
Check First....	Check the following tables for information specific to your unit.
	Table 3-1 provides information on the Error Codes that may be seen on
	the Display. Table 3-2 describes possible issues that may arise when
	utility power is NOT available. Table 3-3 describes possible issues that
	may arise when utility power is available.
Check Next....	Visit www.xantrex.com/support.asp and check the FAQs (Frequently
	Asked Questions) for your product. Many additional questions are
	addressed at this website.
Finally....	If the FAQs don’t address the problem you’re experiencing, then see
	“Warranty” on page WA–1 for contact information for Xantrex Customer
	Service. Contact a Xantrex Customer Support representative for
	assistance.

3–2	975-0288-01-01

Image 38

Xantrex Technology PH1800 manual How to Troubleshoot the PowerHub

Contents

PowerHub Page PowerHub Operator’s Guide Date and Revision Scope About This GuidePurpose Audience Related Information Conventions UsedAbbreviations and Acronyms Important Safety Instructions Figure i Basic Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances FCC/ICES 003 Information to the User Power Down Procedure To Power Down the PowerHub If hardwired...... To Power Down the PowerHub Contents Troubleshooting Specifications Figures Xiv Tables Page Introduction For this topic See Introduction Principles of Inverter Operation Basic Functions of the PowerHub Primary AC source Inverter Features 2PowerHub 1800 Features Battery Charger Features Three-Stage Charging Process on Voltage 12.5 Vdc Contains information on operating the PowerHub Operation 8.8 Inverter Control Panel User Controls and Display LED Operating Mode LEDs Status LEDs Selecting Charger Settings AC LED Power On and Off Basic Operation Changing the Display 3Input Displays 4Output Displays Changing Charging Settings AC is not available Connecting AC Loads 6Connecting AC Loads Loads that should not be used with the PowerHub Typical Loads that might be used with the PowerHubLoads That Might Not Work Well With the PowerHub Troubleshooting How to Troubleshoot the PowerHub Error Codes Troubleshooting Error Codes for Troubleshooting the PowerHub If Utility Power is not Available 2Possible Problems if Utility Power is Not Available Error code E02 If Utility Power is Available 3Possible Problems if Utility Power is Available Possible Problem Loads Rechargeable Devices Ground Fault Protection Replacing the Ground Fault Protection Fuse 1Replacing Ground Fault Protection Fuse Page Specifications Electrical Specifications Table A-1Electrical Specifications for the Inverter Physical Specifications Battery Charger Specifications Figure A-1Three-Stage Charging Process Charging Profiles Amp Charging Profile Table A-610-amp Charging Profile Index IX-2 975-0288-01-01 Warranty and Return Information Warranty Disclaimer Product Exclusions Return Material Authorization PolicyReturn Procedure Out of Warranty Service Information About Your System Purchased From Purchase Date WA-6 Page Xantrex Technology Inc