Safety
If hardwired...... To Power Down the PowerHub 1800:
WARNING: Shock Hazard
If no DC Disconnect is used, then the DC input generators (solar or wind) will have to be physically disconnected to ensure power is OFF.
1
Disconnect any loads directly connected to the front panel of the PowerHub
2
Disconnect Loads connected to the PowerHub through AC Distribution Panel
3Press ON/OFF Switch to turn OFF Inverter/Charger
5Disconnect the Utility power by opening the AC input circuit breaker in the main panel.
4
Disconnect the
DC Input.(s)
Disconnect the Battery Box(es)
6from the Inverter
Figure iii Power Down Procedure for Hardwired Installations
x |
