Changing the Display, 3Input Displays | Xantrex Technology PH1800

Basic Operation

Changing the Display

Press the red Select button to cycle the display through the input and output power values.

Press once.

Press again within 10 seconds.

Press again within 10 seconds.

Figure 2-3Input Displays

Wind input will be displayed.

(This display indicates 1 kw or 1000 watts)

Solar input will be displayed.

(This display indicates 0.36 Kw or 360 watts)

Charger input will be displayed.

(This display indicates 0.48 kW or 480 watts) This screen only displays in Bypass Mode.

Continued in Figure 2-4...

975-0288-01-01

2–7

Image 31

Xantrex Technology PH1800 manual Changing the Display, 3Input Displays

Contents

PowerHub Page Operator’s Guide PowerHub Date and Revision Audience About This GuidePurpose Scope Abbreviations and Acronyms Conventions UsedRelated Information Important Safety Instructions Figure i Basic Safety Precautions When Working With Batteries FCC/ICES 003 Information to the User Precautions for Using Rechargeable Appliances To Power Down the PowerHub Power Down Procedure If hardwired...... To Power Down the PowerHub Contents Specifications Troubleshooting Figures Xiv Tables Page For this topic See Introduction Principles of Inverter Operation Introduction Primary AC source Basic Functions of the PowerHub 2PowerHub 1800 Features Inverter Features Three-Stage Charging Process on Battery Charger Features Voltage 12.5 Vdc Operation Contains information on operating the PowerHub Inverter Control Panel 8.8 LED User Controls and Display Status LEDs Operating Mode LEDs AC LED Selecting Charger Settings Basic Operation Power On and Off 3Input Displays Changing the Display 4Output Displays AC is not available Changing Charging Settings Connecting AC Loads 6Connecting AC Loads Loads That Might Not Work Well With the PowerHub Typical Loads that might be used with the PowerHubLoads that should not be used with the PowerHub Troubleshooting How to Troubleshoot the PowerHub Error Codes Troubleshooting Error Codes for Troubleshooting the PowerHub 2Possible Problems if Utility Power is Not Available If Utility Power is not Available Error code E02 3Possible Problems if Utility Power is Available If Utility Power is Available Possible Problem Loads Rechargeable Devices Replacing the Ground Fault Protection Fuse Ground Fault Protection 1Replacing Ground Fault Protection Fuse Page Specifications Table A-1Electrical Specifications for the Inverter Electrical Specifications Battery Charger Specifications Physical Specifications Figure A-1Three-Stage Charging Process Amp Charging Profile Charging Profiles Table A-610-amp Charging Profile Index IX-2 975-0288-01-01 Warranty Warranty and Return Information Product Disclaimer Return Procedure Return Material Authorization PolicyExclusions Out of Warranty Service Purchased From Purchase Date Information About Your System WA-6 Page Xantrex Technology Inc