Table A-610-amp Charging Profile | Xantrex Technology PH1800

Specifications

10-amp Charging Profile

Table A-6 provides the specific charging parameters for the 10 Charging Profile.

Table A-610-amp Charging Profile

Parameter Name	Default Value

Charger Setting	10 A
Maximum Bypass Current	1200 W (10 A)
Bulk Mode	10 A
Absorption Mode	14.2 Vdc (4 hours maximum)
Float Mode	13.7 Vdc (8 hours)
Switches from Absorption to	4 A
Float Mode
Switches from Float Mode	6 A
back to Bulk Mode within the
8-hour limit, if the Float
current increases to 6 A.
Standby Mode (Off Mode)	12.5 Vdc
Estimated charging time	32 hours based on a single battery box with
	two 100 Ah, 12 Vdc batteries and no other DC
	charging sources

0-amp Charging Profile

When Charger Setting 0 A is selected, the Battery Charger is disabled and will not charge the batteries. Use this mode if other DC charging sources are available or if it is necessary to temporarily disconnect the AC charging system.

A–6	975-0288-01-01

Image 54

Contents

PowerHub Page PowerHub Operator’s Guide Date and Revision Scope About This GuidePurpose Audience Conventions Used Abbreviations and AcronymsRelated Information Important Safety Instructions Figure i Basic Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances FCC/ICES 003 Information to the User Power Down Procedure To Power Down the PowerHub If hardwired...... To Power Down the PowerHub Contents Troubleshooting Specifications Figures Xiv Tables Page Introduction For this topic See Introduction Principles of Inverter Operation Basic Functions of the PowerHub Primary AC source Inverter Features 2PowerHub 1800 Features Battery Charger Features Three-Stage Charging Process on Voltage 12.5 Vdc Contains information on operating the PowerHub Operation 8.8 Inverter Control Panel User Controls and Display LED Operating Mode LEDs Status LEDs Selecting Charger Settings AC LED Power On and Off Basic Operation Changing the Display 3Input Displays 4Output Displays Changing Charging Settings AC is not available Connecting AC Loads 6Connecting AC Loads Typical Loads that might be used with the PowerHub Loads That Might Not Work Well With the PowerHubLoads that should not be used with the PowerHub Troubleshooting How to Troubleshoot the PowerHub Error Codes Troubleshooting Error Codes for Troubleshooting the PowerHub If Utility Power is not Available 2Possible Problems if Utility Power is Not Available Error code E02 If Utility Power is Available 3Possible Problems if Utility Power is Available Possible Problem Loads Rechargeable Devices Ground Fault Protection Replacing the Ground Fault Protection Fuse 1Replacing Ground Fault Protection Fuse Page Specifications Electrical Specifications Table A-1Electrical Specifications for the Inverter Physical Specifications Battery Charger Specifications Figure A-1Three-Stage Charging Process Charging Profiles Amp Charging Profile Table A-610-amp Charging Profile Index IX-2 975-0288-01-01 Warranty and Return Information Warranty Disclaimer Product Return Material Authorization Policy Return ProcedureExclusions Out of Warranty Service Information About Your System Purchased From Purchase Date WA-6 Page Xantrex Technology Inc