Charging Profiles, Amp Charging Profile | Xantrex Technology PH1800

Battery Charger Specifications

Charging Profiles

40-amp Charging Profile

Table A-5 provides the specific charging parameters for the 40 Charging Profile.

Table A-540-amp Charging Profile

Parameter Name	Default Value

Charger Setting	40 A
Maximum Bypass Current	500 W (4 A)
Bulk Mode	40 A
Absorption Mode	14.2 Vdc (4 hours maximum)
Float Mode	13.7 Vdc (8 hours)
Switches from Absorption to Float	4 A
Mode
Switches from Float Mode back to	6 A
Bulk Mode within the 8-hour limit,
if the Float current increases to
6 A.
Standby Mode (Off Mode)	12.5 Vdc
Estimated charging time	8 hours based on a single battery box with
	two 100 Ah, 12 Vdc batteries and no
	other DC charging sources

975-0288-01-01

A–5

Image 53

Contents

PowerHub Page Operator’s Guide PowerHub Date and Revision Purpose About This GuideScope Audience Related Information Conventions UsedAbbreviations and Acronyms Important Safety Instructions Figure i Basic Safety Precautions When Working With Batteries FCC/ICES 003 Information to the User Precautions for Using Rechargeable Appliances To Power Down the PowerHub Power Down Procedure If hardwired...... To Power Down the PowerHub Contents Specifications Troubleshooting Figures Xiv Tables Page For this topic See Introduction Principles of Inverter Operation Introduction Primary AC source Basic Functions of the PowerHub 2PowerHub 1800 Features Inverter Features Three-Stage Charging Process on Battery Charger Features Voltage 12.5 Vdc Operation Contains information on operating the PowerHub Inverter Control Panel 8.8 LED User Controls and Display Status LEDs Operating Mode LEDs AC LED Selecting Charger Settings Basic Operation Power On and Off 3Input Displays Changing the Display 4Output Displays AC is not available Changing Charging Settings Connecting AC Loads 6Connecting AC Loads Loads that should not be used with the PowerHub Typical Loads that might be used with the PowerHubLoads That Might Not Work Well With the PowerHub Troubleshooting How to Troubleshoot the PowerHub Error Codes Troubleshooting Error Codes for Troubleshooting the PowerHub 2Possible Problems if Utility Power is Not Available If Utility Power is not Available Error code E02 3Possible Problems if Utility Power is Available If Utility Power is Available Possible Problem Loads Rechargeable Devices Replacing the Ground Fault Protection Fuse Ground Fault Protection 1Replacing Ground Fault Protection Fuse Page Specifications Table A-1Electrical Specifications for the Inverter Electrical Specifications Battery Charger Specifications Physical Specifications Figure A-1Three-Stage Charging Process Amp Charging Profile Charging Profiles Table A-610-amp Charging Profile Index IX-2 975-0288-01-01 Warranty Warranty and Return Information Product Disclaimer Exclusions Return Material Authorization PolicyReturn Procedure Out of Warranty Service Purchased From Purchase Date Information About Your System WA-6 Page Xantrex Technology Inc