Troubleshooting

ENGLISH

Problem

Possible Cause and Solution

 

 

The Clavinova does not turn on.

The Clavinova has not been plugged in properly. Securely insert the female plug into

 

the socket on the Clavinova, and the male plug into a proper AC outlet (page 12).

 

 

A click or pop is heard when the power is

This is normal when electrical current is being applied to the instrument.

turned on or off.

 

 

 

Noise is heard from the speakers or head-

The noise may be due to interference caused by the use of a mobile phone in close

phones.

proximity to the Clavinova. Turn off the mobile phone, or use it further away from the

 

Clavinova.

 

 

The overall volume is low, or no sound is

• The Master Volume is set too low; set it to an appropriate level using the [MASTER

heard.

VOLUME] control.

 

• Make sure a pair of headphones is not connected to the headphones jack (when the

 

SPEAKER switch is set to the “NORMAL” position). If the SPEAKER switch is set to

 

the “OFF” position, set it to “NORMAL” or “ON” (page 13).

 

• Make sure that Local Control (page 48) is ON.

 

 

The speakers do not switch off when a pair of

The SPEAKER switch may be switched “ON.” Set the SPEAKER switch to the “NOR-

headphones is connected.

MAL” position (page 13).

 

 

TIP

If

 

appears on the display, an internal malfunction has occurred. In this case, contact your Yamaha dealer.

 

 

58 CLP-F01Troubleshooting

Page 58
Image 58
Yamaha CLP-F01 owner manual Troubleshooting, Problem Possible Cause and Solution