MIDI Data Format /
Format des données MIDI / Formato de datos MIDI
If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer- generated MIDI messages, the data provided in this section can help you to control the
Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von
1. NOTE ON/OFF
Data format: [9nH]
9nH = Note ON/OFF event (n = channel number)
kk= Note number (Transmit: 09H ~ 78H =
vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk= Note number: 00H ~ 7FH =
* If received value exceeds the supported range for the selected voice, the note is adjusted by the necessary num- ber of octaves.
2.CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number vv = Data Range
(1)Bank Select
| ccH | Parameter | Data Range (vvH) |
| 00H | Bank Select MSB | 00H:Normal |
| 20H | Bank Select LSB | 00H...7FH |
| Bank selection processing does not occur until receipt of next | ||
| Program Change message. |
| |
(2) | Main Volume (reception only) | ||
| ccH | Parameter | Data Range (vvH) |
| 07H | Volume MSB | 00H...7FH |
(3) | Expression |
| |
| ccH | Parameter | Data Range (vvH) |
| 0BH | Expression MSB | 00H...7FH |
(4) | Damper |
| |
| ccH | Parameter | Data Range (vvH) |
| 40H | Damper MSB | 00H...7FH |
(5) | Sostenuto |
| |
| ccH | Parameter | Data Range (vvH) |
| 42H | Sostenuto | |
(6) | Soft Pedal |
| |
| ccH | Parameter | Data Range (vvH) |
| 43H | Soft Pedal | |
(7) | Effect1 Depth (Reverb Send Level) | ||
| ccH | Parameter | Data Range (vvH) |
| 5BH | Effect1 Depth | 00H...7FH |
| Adjusts the reverb send level. |
| |
(8) | Effect4 Depth (Variation Effect Send Level) | ||
| ccH | Parameter | Data Range (vvH) |
| 5EH | Effect4 Depth | 00H...7FH |
Si vous êtes très familier avec l’interface MIDI ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous seront utiles et vous aideront à commander le
SI usted está ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la
3. MODE MESSAGES
Data format: [BnH]
BnH = Control event (n = channel number)
cc = Control number vv = Data Range
(1)All Sound Off
ccH | Parameter | Data Range (vvH) |
78H | All Sound Off | 00H |
Switches off all sound from the channel. Does not reset Note On and Hold On conditions established by Channel Messages.
(2) Reset All Controllers |
|
| |
ccH | Parameter | Data Range (vvH) | |
79H | Reset All Controllers | 00H | |
Resets controllers as follows. |
|
| |
Controller | Value | ||
Expression | 127 (max) | ||
Damper Pedal | 0 | (off) | |
Sostenuto | 0 | (off) | |
Soft Pedal | 0 | (off) | |
(3) Local Control (reception only) |
| ||
ccH | Parameter | Data Range (vvH) | |
7AH | Local Control | 00H (off), 7FH (on) | |
(4) All Notes Off |
|
| |
ccH | Parameter | Data Range (vvH) | |
7BH | All Notes Off | 00H | |
Switches OFF all the notes that are currently ON on the spec- ified channel. Any notes being held by the damper or soste- nuto pedal will continue to sound until the pedal is released.
(5) Omni Off (reception only) |
| |
ccH | Parameter | Data Range (vvH) |
7CH | Omni Off | 00H |
Same processing as for All Notes Off. | ||
(6) Omni On (reception only) |
| |
ccH | Parameter | Data Range (vvH) |
7DH | Omni On | 00H |
Same processing as for All Notes Off. | ||
(7) Mono (reception only) |
| |
ccH | Parameter | Data Range (vvH) |
7EH | Mono | 00H |
Same processing as for All Sound Off. | ||
(8) Poly (reception only) |
| |
ccH | Parameter | Data Range (vvH) |
7FH | Poly | 00H |
Same processing as for All Sound Off.
•When control change reception is turned OFF in the Function mode, control change data will not be transmitted or received except for Bank Select and Mode messages.
•Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off” transmission).
•When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received.
•The
