Select a voice for the right hand | Yamaha CLP-F01 manual

ENGLISH

3 Select a voice for the right hand.

Press a voice button.

4 Select a voice for the left hand.

Press the corresponding voice button while holding the [SPLIT] button. (The indicator of the Left Voice button will light while the [SPLIT] button is pressed.) To turn the variation on or off for the split voice, hold the [SPLIT] button and press the [VARIATION] button or the currently-selected voice button.

5 Exit Split mode and return to normal play mode.

Press the [SPLIT] button again so that its indicator goes out.

TIP

[VARIATION] in Split Mode

You can turn the variation on or off for Split mode voices. Nor- mally, the voice indicator of the right voice lights in Split mode. The [VARIATION] can be used to turn the variation for the right voice on or off as required. While the [SPLIT] button is held, however, the voice indica- tor of the left voice lights. In this state the [VARIATION] button turns the variation for the left voice on or off.

TIP

[REVERB] in Split Mode

The reverb type assigned to the right voice will take priority over the other. (If the reverb is set to OFF, the left voice’s reverb type will be in effect.) Reverb depth setting via the panel controls (i.e. pressing the [–/NO]or [+/ YES] buttons while holding the [REVERB] button — see page 24) will be applied to the right voice only.

TIP

[EFFECT] in Split Mode

Depending on the conditions, one effect type will take priority over the other. The depth will be decided according to the depth default value of the voice combi- nation. However, using function F4 (page 45) you can change the depth value for each voice as you like. Effect depth setting via the panel controls (i.e. pressing the [–/NO]or [+/YES] buttons while holding the [EFFECT] button — see

page 25) will be applied to the right voice only.

30CLP-F01Selecting & Playing Voices

Image 30

Yamaha CLP-F01 owner manual Select a voice for the right hand, Select a voice for the left hand, Press a voice button

Contents

CLP-F01 Special Message Section Precautions Connections Reference TrademarksIntroduction Appendix Table of Contents Application Index Bench may be included or optional, depending on your locale AccessoriesTuning Transporting Features Transpose To open the key cover Before Using the ClavinovaKey Cover To close the key cover Music Rest To position the music rest for useTo replace the music rest Turn the power on Turning the Power OnConnect the power cord Power indicator Setting the Volume Using Headphones optionUsing the Speaker Switch Memo Clavinova’s various functions Panel Controls and Terminals Connectors Panel Controls and TerminalsTop panel Display Listening to the Demonstration Tunes Play any of the 50 preset songs Listening to 50 Piano Preset SongsEngage Preset Song mode Stop playback Turn off the playback part you wish to practice Exit from Preset Song modeHow to use the practice functions Start playback and playing Left Pedal Start/Stop Repeat for 50 Preset Songs Will appear on the dis Selecting Voices Using the PedalsSelecting & Playing Voices Damper Right Pedal Normal setting Sostenuto Center PedalSoft Left Pedal Depth 0 no effect Adjusting Reverb DepthAdjusting Effect Depth Depth 0 no effect Depth 20 maximum effect depth Changing the volume when Fixed is selected Touch Sensitivity Touch Transposition Transpose Transpose Combining Two Voices Dual mode Engage Dual modeExit Dual mode and return to normal play mode Engage Split mode Split Select a voice for the right hand Exit Split mode and return to normal play modePress the Split button again so that its indicator goes out Select a voice for the left hand Adjusting the time signature Using the MetronomeAdjusting the tempo Start the metronome Select a song for recording Make all the initial settingsRecording Your Performance Recording vs. Saving Start recording Engage Record modeSelect the record track Stop recording Re-recording Track Recording to Track Individual Tracks Voice selectionEntire Song You can change the following initial settings Change the settings via the panel controlsPress the REC button to exit Record mode Playing Back a Song Midi connectorsPlaying Back Recorded Songs Select the desired song Assigning the START/STOP function to the left pedal Useful Playback FunctionsTurning track playback on and off Synchro Detailed Settings Function Parameter List Select a function Basic Procedure in Function ModeEngage Function mode Use the -/NO +/YES buttons Do the following when you ﬁnish using the func- tion Operation Example 1 F1. Fine tuning of the pitchOperation Example 2 F3.1 Dual Balance Display Value Setting rangeAbout Each Function Hz Hertz Pythagorean EqualPureMajor/PureMinor MeanTone Dual Detune ResetSub-mode Dual Balance Voice 1 Octave Shift Voice 2 Octave Shift Right Voice Octave Shift Left Voice Octave Shift Sub-mode Split PointSplit Balance Right Voice Effect Depth Left Voice Effect Depth Soft Pedal Effect Depth Sub-mode Left Pedal ModeKeyoff Sample Volume Sustain Sample Depth F6. Metronome Volume Sub-mode Midi Transmit Channel Selection Local Control ON/OFF Setting range ON/OFF Normal setting onMidi Receive Channel Selection Program Change ON/OFF Panel/Status Transmit ProcedureMidi Transmit Transpose Bulk Data Dump Setting range ON/OFF Normal setting OFF all groups Sub-mode Voice Midi Tuning OthersFactory Preset Recall Description of sub-modes Voice About Midi Midi connectorsTo Host connector Midi cables Connectors Connections AUX in R, L/L+R jacks AUX in L/L+R jack or AUX OUT L/L+R jack Connecting a Personal Computer On the power to the computer ﬁrst, then to the Clavinova Type of serial cables and connection pin assignments Connection Clavinova Host Select switch setting Set the Clavinova Host Select switch to MidiConnection Computer Troubleshooting Problem Possible Cause and Solution Keyboard Stand Assembly Removing the panelsInsert the rear panel center Fasten the rear panels securely Install the rear panels left and rightVoltage Selector Attach the fall-prevention bracket Move the Clavinova to an appropriate location After completing the assembly, please check the followingReview the assembly procedure and correct any errors Check the connection Preset Voice List Voice Name Stereo Touch Dynamic Key-Off Voice Descriptions Wood Bass Voice Name Title Composer Demo Song ListPiano Voice Demo Description Voice Name Piano Voice Demo Index 16, 29 Practicing a One-Hand Part Using 50 Preset Songs......20Soft Pedal 16, 24 Start/Stop playback Appendix Backup Group Function number Default Backup GroupFunction CLP-F01Appendix Panel Data Contents Midi Master VolumePanel Data Transmit General Midi Mode On Data format F0H 7EH XnH 09H 01H F7H Effect Midi Map Midi Parameter Change table EffectMidi Parameter Change table Multi Part Midi Implementation Chart ON/OFF Memo Memo Please Keep this Manual FCC Information U.S.A North America Clavinova Web site English only Yamaha Manual Library