ENGLISH

F9. Backup Functions

TERMINOLOGY

Backup:

You can back up some settings, such as voice selection and reverb type, so that they will not be lost when you turn off the power to the Clavinova.

If the backup function is turned on, the settings at power off are effective. If the backup function is turned off, the settings in memory are erased when you turn off the power. In this case, when you turn on the power to the unit, the default set- tings (the initial settings) will be used. (The factory setting default list is found on page 68.)

However, the backup settings themselves, and the con- tents of the user song recorder memory, are always backed up.

CAUTION

Even if the backup function is turned on via one of the functions described below, the data will be retained in memory for only about one week if the power is not turned on during this time. If the backup period is exceeded, all settings will be reset to their default values. If you want to retain the backup settings for longer peri- ods, be sure to turn the power on for a few minutes at least once a week.

You can turn the backup function on or off for each function group (each of the following sub-mode functions).

1.Engage Function mode and select .

2.Press the [+/YES] button to engage the backup function’s sub-mode, then use the [TEMPO/FUNCTION# ▼ ▲] buttons to select the desired sub-mode.

Press the [–/NO] or [+/YES] button to turn the backup function on or off.

Sub-mode

Voice

MIDI

Tuning

Others

Setting range: ON/OFF

Normal setting: OFF (all groups)

Description of sub-modes

Voice

Voice (Keyboard, Dual, and Split)

Dual (ON/OFF, Voice, and Dual Functions for each voice combination)

Split (ON/OFF, Voice, and Split Functions for each voice combination)

Reverb (ON/OFF, Type, and Depth for each voice)

Effect (ON/OFF, Type, and Depth for each voice)

Variation (for each voice)

Touch Sensitivity (including the FIXED volume)

Metronome (Beat, Volume <

 

 

settings>)

Preset Song Part Cancel Volume (

 

 

settings)

 

 

MIDI

The MIDI functions ( settings)

(expect for the )

Tuning

Transpose

 

 

 

 

 

 

 

 

 

Tuning (

 

settings)

 

 

Scale (including base note) (

 

settings)

 

Others

Other functions ( settings)

Factory Preset Recall

All Dual mode, Split mode, reverb, effect, touch sensitiv- ity, tuning settings, and the settings affected by the Backup Functions can be restored to their original fac- tory preset values by holding the C7 key (right-most key on the keyboard) while turning the [POWER] button ON. This also erases all user song recorder data, and sets all backup on/off settings (F9) to “OFF”. (The factory set- ting list is found on page 68.)

50CLP-F01Detailed Settings – [FUNCTION]

Page 50
Image 50
Yamaha CLP-F01 owner manual Sub-mode Voice Midi Tuning Others, Description of sub-modes Voice, Factory Preset Recall