TUNER
English | Notes: | |
– When 40 radio stations are stored and | ||
| ||
| you attempt to store another radio | |
| station, the display will show | |
| "PROGRAM FULL”. If you want to | |
| change an existing preset number, | |
| repeat steps 3 – 5. | |
| – You can cancel manual programming by | |
| pressing Ç(on the system only). | |
| – During programming, if no button is | |
| pressed within 20 seconds, the system | |
| will exit program mode automatically. |
Tuning to Preset Radio
Stations
•Press 4 or 3 to select the desired preset number.
™The preset number, radio frequency, and waveband appear on the display.
16
Changing the MW tuning grid
(not available for version /30)
The frequency step can be changed if necessary. In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz. In other parts of the world, it is 9 kHz. The frequency step preset in the factory is 9 KHz.
For MW Band
To change from 9 kHz to 10 kHz or vice versa
Changing of tuning grid will erase all previously stored preset stations.
1Disconnect the system from the AC power supply (pull out the AC power cord).
2Press and hold TUNER and TUNING áwhile reconnecting the system to the AC power supply.
™ Display will show “GRID 10” or “GRID 9”.
Notes:
–GRID 9 indicates that the tuning grid is in step of 9 kHz in MW band. GRID 10 indicates that the tuning grid is in step of 10 kHz in MW band.
–FM tuning grid will also be changed from 50 kHz to 100 kHz or vice versa. All preset stations will also be erased.
pg | 16 | 3/3/00, 4:23 PM | 3139 116 19351 |
