Philips FW-C30/21 manual Recording from other sources, View Clock, Clock Setting

RECORDING

English	5 Press STOP•OPEN on tape deck 1 and
	tape deck 2 to stop dubbing.
	Notes:

–At the end of side A, flip the tapes to side B and repeat the procedure.

–Dubbing of tapes is only possible from tape deck 2 to tape deck 1.

–To ensure good dubbing, use tapes of the same length.

Recording from other sources

(only on tape deck 1)

1Load a blank tape into tape deck 1.

2Press CD, TUNER, TAPE or AUX.

CLOCK

	FW-C10MINI HIFI SYSTEM
STANDBY-ON
	JOG	CD1 • 2 • 3			BAND	TAPE 1 • 2		VIDEO
	CONTROL	CD			TUNER	TAPE		AUX
	OPTIMAL		▲ ▲	TUNING	▲ ▲	▲	PRESET	▲
	B
D	B	JAZZ
				SEARCH	STOP• CLEAR PLAY• PAUSE PREV			NEXT
		ROCK	PROGRAM		CLOCK•TIMER	DIM

TECHNOMICROPHONE - LEVEL

VOLUME

SOUND NAVIGATION - JOG

•Start playback of the selected source.

3 Press RECORD on tape deck 1 to start recording.

™The REC starts flashing.

4Press PAUSE to interrupt recording.

5Press STOP•OPEN on tape deck 1 to stop recording.

Note:

–During recording, it is not possible to listen to another sound source.

20

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about seven seconds.

•Press CLOCK•TIMER briefly.

™“10:38 PM or 22:38” (the current time in either 12- or 24-hour mode) will be displayed depending on whether you have selected 12- or 24- hour mode.

™“--:--” will be displayed if the clock is not set.

Clock Setting

The clock can be set in either 12- or 24- hour mode, e.g. “12:00 AM“ or “00:00“. Before setting the clock, you must be in the View Clock mode.

1Press CLOCK•TIMER to select clock mode.

2Press PROGRAM to select 12- and 24- hour mode.

™If 12-hour mode is selected,

“12:00“ starts flashing and the AM lights up.

™If 24-hour mode is selected, “00:00” starts flashing.

3Set the hour with àor áon the system.

4Set the minute with íor ëon the system.

pg 01-24/C30/21&/30-En 20 3/3/00, 4:23 PM 3139 116 19351