Philips FW-C30/21 Operating The System, Easy Set, Switching the system ON, Demonstration mode

OPERATING THE SYSTEM

English		FW-C10MINI HIFI SYSTEM
	STANDBY-ON
		JOG	CD1 • 2 • 3			BAND	TAPE 1 • 2		VIDEO
		CONTROL	CD			TUNER	TAPE		AUX
		OPTIMAL		▲ ▲	TUNING	▲ ▲		PRESET	▲
							▲
		B
	D	B	JAZZ
					SEARCH	STOP• CLEAR PLAY• PAUSE PREV			NEXT
			ROCK	PROGRAM		CLOCK•TIMER	DIM

Easy Set

EASY SET allows you to store all available radio stations automatically.

• Press and hold STANDBY ON (on the

system only) for 5 seconds when the

system is in standby or demonstration

mode.

™ “EASY SET” will be displayed, and

followed by “TUNER” and then

Switching the system ON

•Press CD, TUNER, TAPE or AUX.

You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.

Switching the system to standby mode

TECHNO

MICROPHONE - LEVEL

VOLUME

SOUND NAVIGATION - JOG

“AUTO”.

™ EASY SET will start searching for all

radio stations on FM band and then

followed by radio stations on MW

band.

•Press STANDBY ON or B on the remote control.

™The system will switch to standby mode.

Important:

Before you operate the system, complete the preparation procedures.

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system. When the system is switched on for the first time, the demonstration mode will start automatically.

Notes:

–During the demonstration, if you press any source (or standby-on) button, the system will switch to the respective mode (or standby).

–When the system is switched to standby mode, the demonstration will resume five seconds later.

10

To stop the demonstration mode

•Press and hold Ç(on the system only) for 5 seconds when the system is in demonstration mode.

™The demonstration will stop.

™"DEMO OFF" is displayed.

™The system will switch to standby mode.

Note:

–Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.

To start the demonstration mode

•Press and hold Ç(on the system only) for 5 seconds when the system is in standby mode.

™ The demonstration will begin.

™ All available radio stations with

sufficient signal strength will be

stored. Up to 40 presets may be

stored.

Notes:

–EASY SET will start with the FM band, if there are still presets available, the system will continue to store the MW band.

–When EASY SET is used, all previously stored radio stations will be replaced.

–The last preset radio station will appear on the display when EASY SET is completed.

Selecting the Source

•Press the respective source selection button: CD, TUNER, TAPE or AUX.

™The display indicates the selected source.

Note:

–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals.

pg 01-24/C30/21&/30-En 10 3/3/00, 4:23 PM 3139 116 19351