![](/images/new-backgrounds/1294508/29450887x1.webp)
ENGLISH
F3. Dual Mode Functions
You can set various parameters for Dual mode to optimize the settings for the songs you play, such as adjusting the volume balance between two voices.
Dual mode function settings are set individu- ally for each voice combination.
1.Select the voices in Dual mode and engage
Function mode and select .
2.Press the [+/YES] button to engage the Dual mode function’s
NOTE
If Dual mode is not engaged, will appear instead of
and you will be unable to select Dual mode functions.
You can switch from Function mode to Dual mode.
Sub-mode
Dual Balance
Setting range: 0 – 20 (A setting of “10” produces an equal balance between the two Dual mode voices. Settings below “10” increase the volume of Voice 2 in relation to Voice 1, and settings above “10” increase the volume of Voice 1 in relation to Voice 2.)
Normal setting: Different for each voice combina- tion.
You can set one voice as the main voice, and another voice as a softer, mixed voice.
Dual Detune
Setting range:
TIP
The available setting range is wider in the lower range (± 60 cents for
Normal setting: Different for each voice combina- tion.
Detune Voice 1 and Voice 2 for Dual mode to create a thicker sound.
Voice 1 Octave Shift
Voice 2 Octave Shift
Setting range: –1, 0, 1
Normal setting: Different for each voice combina- tion.
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave.
Voice 1 Effect Depth
Voice 2 Effect Depth
Setting range: 0 – 20
Normal setting: Different for each voice combina- tion.
These functions make it possible to individually set the depth of the effect for Voices 1 and 2 for Dual mode. (The effect depth settings cannot be changed unless the [EFFECT] is ON. Function mode must be exited before the [EFFECT] can be turned ON.)
• “Voice 1” and “Voice 2” are explained on page 28.
Reset
This function resets all Dual mode functions to their default values. Press the [+/YES] button to reset the val- ues.
TIP
SHORTCUT:
You can jump directly to the Dual mode functions by pressing the [TEMPO/FUNCTION#] button while holding the two Dual mode voice buttons.
To exit Function mode, you still need to press the [TEMPO/ FUNCTION#] button so that the TEMPO indicator lights up.
44