JVC RX-DP20VBK Using Preset Tuning, Press PRESET 5 / ∞ inside, the front door until you find

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM stations.

To store the preset stations

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

2.	Press PRESET 5 / ∞ (inside	/ PRESET	/ PRESET
		LEFT	RIGHT
	the front door) until you find
	the channel you want.
From the remote control:
1.	Press FM/AM.		FM/AM

The last received station of the last selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

1.Tune in to an FM or AM station you want to preset (see “Tuning in to Stations Manually” on page 33).

•If you want to store the FM reception mode for an FM station, select the FM reception mode you want. See “Selecting the FM Reception Mode.”

ANALOG		TUNED	STEREO	AUTO MUTING
L	R			SPEAKERS 1
SUBWFR				VOLUME

dB

2.Press the 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

		EFFECT
1	2	3
		LIVENESS
4	5	6
7/P	8	9
10	0	+10
RETURN	FM MODE	100+

2. Press MEMORY (inside the front
	SET
door).	/ MEMORY

ANALOG		TUNED	STEREO	AUTO MUTING
L	R			SPEAKERS 1
SUBWFR				VOLUME

dB

You can only select the same station of the same band (FM or AM) for both Zone 1 and Zone 2 operations. If you change the station for Zone 2, it also changes for Zone 1 (and vice versa: indications in the main display also change). This also means that if you change the station for Zone 2 while recording a broadcasting program in

Zone 1, recording in Zone 1 will be interrupted.

The channel number position starts flashing on the display for about 10 seconds.

3. Press PRESET 5 / ∞ (inside the		LEFT	RIGHT
		/ PRESET	/ PRESET
front door) to select a channel
number while the channel number
position is flashing.
ANALOG	TUNED STEREO	AUTO MUTING
LR		SPEAKERS 1
SUBWFR			VOLUME
			dB
4. Press MEMORY again while the		SET
selected channel number is		/ MEMORY

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy

You can change the FM reception mode while receiving an FM broadcast.

• You can store the FM reception mode for each preset station.

Press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”

EXIT	0
/ FM MODE

flashing on the display.

The selected channel number stops flashing.

The station is assigned to the selected channel number.

On the unit

FM MODE

From the remote control

5.Repeat steps 1 to 4 until you store all the FM and AM stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

To tune in to a preset station

On the unit:

FM/AM

1. Press FM/AM.

The last received station of the last selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

(inside the front door)

AUTO MUTING: When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO: Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning in to the stations. The AUTO MUTING and STEREO indicators go off.

Note:

When you press FM MODE on the remote control, be sure that “TUNER” appears on the remote’s display. If not, press FM/AM first to select the FM band, then press FM MODE.

34