JVC RX-DP20VBK CD player-changer, Press CD, then press +10, Select a disc number, Turntable

CD player

After pressing CD, you can perform the following operations on the CD player:

PLAY : Starts playing.

4: Returns to the beginning of the current (or previous) track.

¢: Skips to the beginning of the next track.

STOP	: Stops playing.
PAUSE	: Pauses playing. To release, press PLAY.

1 – 10, +10 : Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

CD player-changer

After selecting “CD DISC” by pressing CONTROL repeatedly, you can perform the following operations on a CD player-changer:

PLAY : Starts playing.

4: Returns to the beginning of the current (or previous) track.

¢: Skips to the beginning of the next track.

STOP	: Stops playing.
PAUSE	: Pauses playing. To release, press PLAY.
1 – 6, 7/P	: Selects the number of a disc installed in a CD
	player-changer.

After pressing CD, you can perform the following operations on the CD player-changer:

1 – 10, +10 : Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

EXAMPLE:

•Selecting disc number 4, track number 12, and starting playback.

1.Press CONTROL repeatedly until “CD DISC” appears on the remote’s display, then press 4.

2.Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301)

You can do the following operations using the 10 keys after pressing CD:

1.Select a disc number.

2.Then select a track number (always enter two digits).

3.Start playback.

EXAMPLES:

•Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then PLAY.

•Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then PLAY.

•Selecting disc number 105, track number 12, and starting playback. Press 1, 0, 5, then 1, 2 then PLAY.

Turntable

After pressing PHONO, you can perform the following operations on a turntable:

PLAY	: Starts playing.
STOP	: Stops operations.

CD recorder

After pressing CDR or selecting “CDR” by pressing CONTROL repeatedly, you can perform the following operations on a CD recorder:

PLAY : Starts playing.

4: Returns to the beginning of the current (or

previous) track.

¢: Skips to the beginning of the next track.

STOP	: Stops playing.
PAUSE	: Pauses playing. To release, press PLAY.

1 – 10, +10 : Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Note:

When you start recording on the CD recorder, use the buttons on the CD recorder itself or on the remote control supplied for it.

Cassette deck

After pressing TAPE/MD or selecting “TAPE” by pressing CONTROL repeatedly, you can perform the following operations on a cassette deck:

PLAY	: Starts playing.
REW	: Fast-winds the tape from right to left.

FF: Fast-winds the tape from left to right.

STOP	: Stops operations.
PAUSE	: Pauses playing. To release, press PLAY.

¶REC : Press this button together with the PLAY button to start recording (for Zone 1 operation only).

Press this button together with the PAUSE button to enter recording pause (for Zone 1 operation only).

Note:

When connecting the cassette recorder to the TAPE/MD IN jacks, change the source name to “TAPE”—initial setting (see page 27).

MD recorder

After pressing TAPE/MD or selecting “TAPE*” by pressing CONTROL repeatedly, you can perform the following operations on the MD recorder:

PLAY : Starts playing.

4: Returns to the beginning of the current (or previous) track.

¢: Skips to the beginning of the next track.

STOP	: Stops playing.
PAUSE	: Pauses playing. To release, press PLAY.

¶REC : Press this button together with the PLAY button to start recording (for Zone 1 operation only).

Press this button together with the PAUSE button to enter recording pause (for Zone 1 operation only).

Notes:

• When connecting an MD recorder to the TAPE/MD IN jacks, change the source name to “MD” (see page 27).

*Selecting “TAPE” will allow you to control the MD recorder.

72