JVC RX-DP20VBK manual Activating the DSP Modes, To adjust the DSP effects, To cancel the DSP modes

All Channel Stereo mode

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. This mode cannot be used

without activating the surround speakers.

•If headphones are connected or if the front speakers are deactivated, “ALL CH STEREO” cannot be selected.

•The settings on the EFFECT ADJUST submenu are not valid for “ALL CH STEREO.”

Stereo Film and Monaural Film modes

In order to reproduce a more acoustic sound field in your listening room while viewing stereo sound or monaural sound video software (analog and 2-channel digital signals), you can use these modes. The surround effect will be added, and the sound localization of actor’s words will be improved. This mode cannot be used when the source is “DVD MULTI” or “EXT 7.1CH” and when multi- channel digital signals are coming in.

STEREO FILM : To play back stereo video software

MONO FILM : To play back monaural video software

When “STEREO FILM” or “MONO FILM” is used, sounds come out of all the connected (and activated) speakers.

•If incoming signals changes from 2-channel digital signal to another digital signal type, “STEREO FILM” or “MONO FILM” is canceled and an appropriate Surround mode is activated.

Activating the DSP Modes

Perform the basic settings and adjustments using the Setup and Adjustment Menus first (see pages 35 to 50).

Activating one of the DSP modes for a source automatically recalls the memorized settings and adjustments.

IMPORTANT:

Check to see if the following before or while using the buttons and controls.

For the Zone 1 operations:

The ZONE 1 ON/OFF lamp on the unit is lit.

• When using the unit:
– “ZONE 2” is not shown in the main display.	DOOR
	DOWN

–Press DOOR DOWN to use the buttons inside the front door.

To close the front door, press DOOR UP.

•When using the remote control:

–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1.”

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either ZONE 1 or ZONE 2) for a while.

		LEARN	TRANSMIT
			STANDBY	ON
		ZONE 1	ZONE 2
LEARN	TRANSMIT	ZONE 1	ZONE 2 TV/CATV/DBS	VCR 1
		ON/OFF	ON/OFF
			STANDBY/ON	STANDBY/ON
ZONE 1	ZONE 2	ZONE 1

Ex. When you press DSP with

ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 1.”

1.Select and play any sound source.

2.Press DSP repeatedly until the DSP mode you want appears on the display.

•Each time you press the button, the DSP modes change as follows:

DSP

DSP

	On the unit	From the remote control
(inside the front door)
	DGTL AUTO	SPEAKERS 1
L C	R
		PARAMETRIC EQ MIDNIGHT MODE
SUBWFR	LFE DIGITAL	VOLUME
LS	DSP
	RS

dB

=LARGE HALL 1 = LARGE HALL 2 = RECITAL HALL

=OPERA HOUSE = CHURCH = LIVE CLUB

=DANCE CLUB = PAVILION = ALL CH STEREO

=LARGE THEATER = SMALL THEATER

=STEREO FILM* = MONO FILM*

=(Back to the beginning)

* When multi-channel signals come in, you cannot select “STEREO FILM” and “MONO FILM.”

Notes:

•When the surround speakers are deactivated, the 3D-PHONIC processing is applied to the DSP modes except “ALL CH STEREO” (the 3D-PHONIC indicator also lights up).

•If the Surround/THX mode is in use, it will be canceled when you turn on the DSP mode.

To adjust the DSP effects

Using the 10 keys on the remote control, you can adjust the level of the overall effect and the liveness (except for “ALL CH STEREO”).

•Once you adjust the levels using the following procedure, the adjustments you have done on the Adjustment Menu will be also changed. (It is recommended to adjust the DSP effects using the Adjustment Menu since you can adjust other elements as well.)

1. Press SOUND. SOUND

The 10 keys are activated for sound adjustments.

2. Press EFFECT repeatedly to adjust the level

EFFECT

of the overall effect (1 to 5).

3

3. Press LIVENESS repeatedly to adjust the liveness (1 to 5).

LIVENESS

6

To cancel the DSP modes

Press SURR/DSP OFF.

“SURROUND OFF” appears on the display.

SURR/DSP	SURR/DSP
OFF	OFF

On the unit	From the remote control
(inside the front door)

•When a pair of headphones is connected or when the front speakers are deactivated, “HEADPHONE” will appear.

59