JVC RX-DP20VBK manual Sound Adjustments, Adjustment Menu Configuration

Sound Adjustments

Sound adjustment operations are only possible while the receiver is ready for Zone 1 operations.

Adjustment Menu Configuration

ADJUST MENU

1 PARAMETRIC EQ (See page 48.)

2 MIDNIGHT MODE

(See page 49.)

3 EFFECT ADJUST (See page 49.)

(When DSP is activated)

(When Neo:6 Music is activated)

(When Pro Logic II Music is activated)

(When one of the other modes

is activated, or when the source is

“DVD MULTI” or “EXT 7.1CH”)

NOTICE—

•If Analog Direct is in use (see page 27), you cannot make any sound adjustments using the Adjustment Menu.

•Items on the menus shown above are all set to the initial values when shipped from the factory.

•Some of the menus or some items on the menu cannot be shown or cannot be adjusted. (For details, see the respective explanations in this section.)

Note:

When performing sound adjustments viewing the indications on the main unit’s display, the indications shown are slightly different from what are shown on the on-screen display.

This is because of the limited number of characters shown on the main unit’s display.

Ex. • “PEQ SURR BACK” is shown as “PEQ SBACK” on the main unit’s display.

•“TREBLE LEVEL” is shown as “TREBLE LVL” on the main unit’s display.

45