JVC RX-DP20VBK manual AV COMPU LINK Remote Control System, CONNECTIONS 2: AV COMPU LINK Connection

AV COMPU LINK Remote Control System

This receiver is equipped with the AV COMPU LINK-III. The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player) through the receiver. To use this remote control system, you need to connect the video components you want to operate, following the procedure below.

•Refer also to the manuals supplied with your video components.

1.If you have already plugged your VCR 1 (VCR connected to the VCR 1 jacks), DVD player, TV, and this receiver into the AC outlets, unplug their AC power cords first.

2.Connect the IR signal transmitter (supplied) to the IR OUT on the rear, and place it so that it is aimed at the remote sensor(s) on the target video component(s).

•See “CONNECTIONS 1” below (and page 17 for details).

3.Connect your VCR 1, DVD player, TV, and this receiver as follows, using cables with monaural mini-plugs (not supplied).

•See “CONNECTIONS 2” below.

4.Connect the audio input/output jacks on VCR 1, DVD player, TV, and this receiver using the cables with RCA pin plug.

•See pages 13 to 15.

5.Connect the video input/output jacks on VCR 1, DVD player, TV, and this receiver, using the cables with RCA pin plugs, with S-video plugs or with component video plugs.

•See “CONNECTIONS 3” on the next page (and pages 13 to 15 for details).

6.Plug the AC power cords of the components into the AC outlets.

7.When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.

8.Turn on the other connected components first, then turn on this receiver.

•When turning on the VCR 1, use the remote control supplied with this receiver—press VCR 1 (STANDBY/ON).

CONNECTIONS 1: IR Signal Transmitter Connection

Target video component(s)
On the rear panel					RX-DP20VBK
COMPU	AV	TEXT	IR	CTRL
LINK-4	COMPU COMPU			OUT
			OUT
(SYNCHRO) LINK-		LINK		+12V
			IR	10mA MAX
			IN
At an angle of
approx. 60°
IR signal transmitter

CONNECTIONS 2: AV COMPU LINK Connection

VCR 1 DVD player

VHS	COMPU	AV	TEXT	IR	CTRL
DVD	LINK-4	COMPU	COMPU		OUT
				OUT
	(SYNCHRO)	LINK-	LINK		+12V

AV
COMPU LINK	IR	10mA MAX
	IN

AV

COMPU LINK

RX-DP20VBK

Notes:

TV

AV COMPU LINK EX

AV

COMPU LINK III

CAUTION:

When connecting the TV with the AV COMPU LINK remote control system, connect the receiver to the AV COMPU LINK EX or AV COMPU LINK III terminal.

DO NOT connect the receiver to the AV COMPU LINK RECEIVER/ AMP terminal.

•The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV SOUND/DBS IN jacks, and video components connected to the VIDEO and VCR 2 IN jacks on the receiver.

•When connecting only the VCR 1 or DVD player to this receiver, connect it directly to the receiver using a cable with the monaural mini- plugs.

•When connecting the receiver and the TV with AV COMPU LINK EX terminal by using the component video cables, you cannot use Automatic Selection of TV’s Input Mode (see page 70).

68